Vienna Indigo

Width 37-3/4" | Height 46-3/8" | Depth 19-7/8"

Signature style wood hood that comes with a stainless steel liner. The chimney height of 23-1/2" can be trimmed on site, if needed. Blower is not included and would need to be purchased separately. The chimney depth is 9-11/16" and the width is 17-3/8".

Width 96" | Height " | Depth "

Shaker crown molding that is reversible so can be installed two ways. When installed, it will be 3-1/4" high and will stick out from the cabinet 3-1/4".

Width 96"

Large crown molding, when installed, it will be 3-3/8" high and will stick out from the cabinet 3".

Width 96"

Small cove molding, when installed, it will be 2-1/8" high and will stick out from the cabinet 2-1/8".

Width 96"

Cove crown molding, when installed, it will be 2-1/2" high and will stick out from the cabinet 2-7/8".

Width 96"

Large cove crown molding. When installed, it will be 4-1/2" high and will stick out from the cabinet 4-1/2".

Width 96"

Extra large cove crown molding. When installed, it will be 5-1/2" high and will stick out from the cabinet 5-1/2".

Width 96" | Height .75" | Depth 1.5"

Starter molding that is installed above wall and tall cabinets which acts as a cleat for a molding extension (SKU: MEX-8), to make it easier to mount moldings on top of the cabinets. The starter molding and molding extension are ideal to use when mounting crown molding all the way to the ceiling.

Width 96" | Height 6" | Depth .75"

Molding extension that is used with starter molding (SKU: STRM-8) to make it easier to install molding on the tops of cabinets. The molding extension can be used without the starter molding, but it would first need a cleat support installed on site.

Width 96" | Height .75" | Depth 1.5"

Light rail molding, overall depth is 1-1/2", the flat part that will install under the wall cabinets is 3/4" deep. The lip that will extend over the front of the wall cabinet is 1/4" high.

Width 96" | Height " | Depth .75"

Small batten molding.

Width 96" | Height " | Depth 1.25"

Large batten molding.