Vienna Cloud

Width 42" | Height 40-5/16" | Depth 19"

Euro style wood hood that comes with a stainless steel liner. The chimney height of 23-1/2" can be trimmed on site, if needed. Blower is not included and would need to be purchased separately. The chimney depth is 9-11/16" and the width is 23-3/8".

Width 42" | Height 54-3/4" | Depth 19"

Farmhouse style wood hood that comes with a stainless steel liner. The chimney height of 23-1/2" can be trimmed on site, if needed. Blower is not included and would need to be purchased separately. The chimney depth is 13-7/16" and the width is 30-15/16".

Width 96" | Height " | Depth "

Shaker crown molding that is reversible so can be installed two ways. When installed, it will be 3-1/4" high and will stick out from the cabinet 3-1/4".

Width 17" | Height 18" | Depth 12"

Appliance garage with a front width of 17". It will have a roll up, tambour door and is designed to fit under a 24x24 diagonal corner wall cabinet. The door opening is approximately 14" wide, the tambour door is partially inserted into the frame on either side.

Width 42" | Height 34.5" | Depth 24"

2 door base cabinet with 1 three quarter depth adjustable shelf and 2 drawers. This cabinet will have a 2-5/8" center stile.

Width 42" | Height 34.5" | Depth 24"

Sink base cabinet with 2 doors and 2 false drawer fronts. This cabinet will have no shelves.

Width 96"

Large crown molding, when installed, it will be 3-3/8" high and will stick out from the cabinet 3".

Width 96"

Small cove molding, when installed, it will be 2-1/8" high and will stick out from the cabinet 2-1/8".

Width 96"

Cove crown molding, when installed, it will be 2-1/2" high and will stick out from the cabinet 2-7/8".

Width 96"

Large cove crown molding. When installed, it will be 4-1/2" high and will stick out from the cabinet 4-1/2".

Width 96"

Extra large cove crown molding. When installed, it will be 5-1/2" high and will stick out from the cabinet 5-1/2".

Width 96" | Height .75" | Depth 1.5"

Starter molding that is installed above wall and tall cabinets which acts as a cleat for a molding extension (SKU: MEX-8), to make it easier to mount moldings on top of the cabinets. The starter molding and molding extension are ideal to use when mounting crown molding all the way to the ceiling.