Vienna Cloud

Width 30" | Height 6" | Depth 12"

Organizer cabinet with wood veneer edge banding and a finished interior. There will be 2 horizontal shelving areas on the left which measure approximately 11-1/8"W x 2"H, and 3 vertical storage areas on the right which measure approximately 5-1/4"W x 4-3/4"H.

Width 30" | Height 6" | Depth 12"

Organizer cabinet with wood veneer edge banding and a finished interior. There will be 2 horizontal shelving areas on either end which measure approximately 11-1/8"W x 2"H, and 2 vertical storage areas in the middle which measure approximately 5-1/4"W x 4-3/4"H.

Width 96" | Height 6" | Depth .75"

Molding extension that is used with starter molding (SKU: STRM-8) to make it easier to install molding on the tops of cabinets. The molding extension can be used without the starter molding, but it would first need a cleat support installed on site.

Width 96" | Height 6" | Depth .75"

Shiplap interlocking molding commonly used for walls, backsplash, or the backs of islands and peninsulas.

Width 8-1/2" | Height 29-1/2" | Depth "

Decorative door. Size will be the same size as the door from a 9x30 wall cabinet. This can be used to configure the back of an island or peninsula.

Width 11-1/2" | Height 29-1/2" | Depth "

Decorative door. Size will be the same size as the door from a 12x30 wall cabinet. This can be used to configure the back of an island or peninsula or on the side of a 30"H x 12"D wall cabinet.

Width 14-1/2" | Height 29-1/2" | Depth "

Decorative door. Size will be the same size as the door from a 15x30 wall cabinet. This can be used to configure the back of an island or peninsula.

Width 17-1/2" | Height 29-1/2" | Depth "

Decorative door. Size will be the same size as the door from a 18x30 wall cabinet. This can be used to configure the back of an island or peninsula.

Width 20-1/2" | Height 29-1/2" | Depth "

Decorative door. Size will be the same size as the door from a 21x30 wall cabinet. This can be used to configure the back of an island or peninsula.

Width 23.5" | Height 29.5" | Depth "

Wainscot base panel, to be used on the exposed side of a base cabinet. It will match the door style of the cabinets being ordered.

Width 11.5" | Height 29.5" | Depth "

Wainscot wall panel to be used on the exposed side of a 30"H x 12"D wall cabinet. It will match the door style of the cabinets being ordered.

Width 37-3/4" | Height 46" | Depth 19-7/8"

Artisan style wood hood that comes with a stainless steel liner. The chimney height can be trimmed up to 12" on site, if needed. Blower is not included and would need to be purchased separately. The chimney depth is 9-1/2" and the width is 17".