Union White

Width 54" | Height 2.5" | Depth 10"

Floating shelf that will include the mounting brackets and hardware. The weight limit is 15 lbs/linear foot as long as the proper installation instructions are followed (instructions will be included with the shelf).

Width 54" | Height 2.5" | Depth 10"

Floating plywood shelf with a walnut finish that will include the mounting brackets and hardware. The weight limit is 15 lbs/linear foot as long as the proper installation instructions are followed (instructions will be included with the shelf).

Width 6” | Height 30” | Depth 12”

Open end wall cabinet with 2 shelves. Shelves are not adjustable, and bottom panel will be curved at the edge. This cabinet will be open on the left side (installing on the right side). Please note there will be visible screws on the back and side of the cabinet, as they are intended to be installed against two walls, or a wall and adjacent cabinet.

Width 6” | Height 36” | Depth 12”

Open end wall cabinet with 2 shelves. Shelves are not adjustable, and bottom panel will be curved at the edge. This cabinet will be open on the left side (installing on the right side). Please note there will be visible screws on the back and side of the cabinet, as they are intended to be installed against two walls, or a wall and adjacent cabinet.

Width 6” | Height 42” | Depth 12”

Open end wall cabinet with 3 shelves. Shelves are not adjustable, and bottom panel will be curved at the edge. This cabinet will be open on the left side (installing on the right side). Please note there will be visible screws on the back and side of the cabinet, as they are intended to be installed against two walls, or a wall and adjacent cabinet.

Width 6” | Height 30” | Depth 12”

Open end wall cabinet with 2 shelves. Shelves are not adjustable, and bottom panel will be curved at the edge. This cabinet will be open on the right side (installing on the left side). Please note there will be visible screws on the back and side of the cabinet, as they are intended to be installed against two walls, or a wall and adjacent cabinet.

Width 6” | Height 36” | Depth 12”

Open end wall cabinet with 2 shelves. Shelves are not adjustable, and bottom panel will be curved at the edge. This cabinet will be open on the right side (installing on the left side). Please note there will be visible screws on the back and side of the cabinet, as they are intended to be installed against two walls, or a wall and adjacent cabinet.

Width 6” | Height 42” | Depth 12”

Open end wall cabinet with 3 shelves. Shelves are not adjustable, and bottom panel will be curved at the edge. This cabinet will be open on the right side (installing on the left side). Please note there will be visible screws on the back and side of the cabinet, as they are intended to be installed against two walls, or a wall and adjacent cabinet.

Width 54" | Height 12" | Depth .75"

Arched Recessed panel valance that can be trimmed up to 3" on each side.

Width 54" | Height 5.5" | Depth .75"

Arched valance. The width of the flat section on either side of the arch is 6" and it can be trimmed up to 3" on each side.

Width 6" | Height 34.5" | Depth 24"

Appliance end panel with a 6" stile on the front. Can be trimmed down to 1" wide if necessary. Panel is 1/2" thick plywood.

Width 6" | Height 30" | Depth 24"

Spice pull out to be used with a 6x30 filler (sold separately - see SKU WF630). It comes with chrome rails and full extension, ball bearing glides (not soft-close). It will have 3 adjustable shelves and is constructed of UV coated maple wood. The pullout must be installed between 2 cabinets and the 6" filler (SKU WF630) must be ordered separately. An additional overlay or decorative filler can be installed on the 6" filler if desired (also sold separately).