Union White

Width 3" | Height 36.5" | Depth 3"

Decorative post. The top smooth portion is 4" high and the bottom smooth portion is 6" high.

Width 48" | Height 2.5" | Depth 10"

Floating plywood shelf with a walnut finish that will include the mounting brackets and hardware. The weight limit is 15 lbs/linear foot as long as the proper installation instructions are followed (instructions will be included with the shelf).

Width 48" | Height 12" | Depth 24"

Lift up refrigerator wall cabinet featuring Blum hardware. There will be no shelf with this cabinet. *Please note that this item is made to order and carries an extended lead time of 6-8 weeks, any items ordered with it, from the same (or matching) collection will also incur the extended lead time.*

Width 3" | Height 30" | Depth 12"

Wall column that can be trimmed on site if needed.

Width 3" | Height 36" | Depth 12"

Wall column that can be trimmed on site if needed.

Width 3" | Height 42" | Depth 12"

Wall column that can be trimmed on site if needed.

Width 3" | Height 96" | Depth 24"

Refrigerator end panel with 3" stile on the front. The panel itself is 3/4" thick.

Width 3" | Height 34.5" | Depth 24"

Appliance end panel with a 3" stile on the front. Can be trimmed down to 1" wide if necessary. Panel is 1/2" thick plywood.

Width 3" | Height 34.5" | Depth 24"

Base column that can be trimmed on site if needed.

Width 3" | Height 30" | Depth 24"

Spice pull out to be used with a 3x30 filler (sold separately - see SKU WF330). It comes with chrome rails and full extension, ball bearing glides (not soft-close). It will have 3 adjustable shelves and is constructed of UV coated maple wood. The pullout must be installed between 2 cabinets and the 3" filler (SKU WF330) must be ordered separately. An additional overlay or decorative filler can be installed on the 3" filler if desired (also sold separately).

Width 3" | Height 30" | Depth 2.25"

Wall plain pilaster. The filler the pilaster is mounted on is 3/4" deep, the pilaster itself is 1-1/2" deep. Top and bottom sections above and below the pilaster are each 2" tall. 2" will need to be trimmed from the top or bottom before installation. **Pilasters are handmade and may therefore feature inconsistencies in shape or form. These are in no way considered defects**

Width 4.5" | Height 36" | Depth 4.5"

Standard post. Top section is 4" tall and bottom section is 6-1/4" tall, 2" must be trimmed from the top or bottom before installation. **Posts are handmade and may therefore feature inconsistencies in shape or form. These are in no way considered defects**