Union White

Width 96"

Extra large cove crown molding. When installed, it will be 5-1/2" high and will stick out from the cabinet 5-1/2".

Width 96"

Large cove crown molding. When installed, it will be 4-1/2" high and will stick out from the cabinet 4-1/2".

Width 96" | Height 6" | Depth .75"

Molding extension that is used with starter molding (SKU: STRM-8) to make it easier to install molding on the tops of cabinets. The molding extension can be used without the starter molding, but it would first need a cleat support installed on site.

Width 96" | Height 6" | Depth .75"

Shiplap interlocking molding commonly used for walls, backsplash, or the backs of islands and peninsulas.

Width 96" | Height .75" | Depth 2.5"

Stacking molding to be used as a decorative piece between cabinets that are getting stacked one above the other. This hides the 'cabinet seam' that you would normally see without a decorative molding in between or applied over the seam.

Width 96" | Height .75" | Depth 1.5"

Starter molding that is installed above wall and tall cabinets which acts as a cleat for a molding extension (SKU: MEX-8), to make it easier to mount moldings on top of the cabinets. The starter molding and molding extension are ideal to use when mounting crown molding all the way to the ceiling.

Width 48" | Height 2.5" | Depth 10"

Floating plywood shelf with a walnut finish that will include the mounting brackets and hardware. The weight limit is 15 lbs/linear foot as long as the proper installation instructions are followed (instructions will be included with the shelf).

Width 48" | Height 12" | Depth 24"

Lift up refrigerator wall cabinet featuring Blum hardware. There will be no shelf with this cabinet. *Please note that this item is made to order and carries an extended lead time of 6-8 weeks, any items ordered with it, from the same (or matching) collection will also incur the extended lead time.*

Width 48" | Height 96" | Depth .5"

Back panel that is made of 1/2" thick plywood. Only 1 side will be finished, all edges and opposite side will be unfinished.

Width 48" | Height 96" | Depth .25"

Back panel that is made of 1/4" thick MDF. Only 1 side will be finished, all edges and opposite side will be unfinished.

Width 48" | Height 96" | Depth .75"

Back panel that is made of 3/4" thick plywood. Only 1 side will be finished, all edges and opposite side will be unfinished.

Width 48" | Height 34.5" | Depth 24"

1 door blind base corner cabinet with 1 drawer and 1 shelf. This cabinet can be placed all the way in the corner (without any pull) so it would take up 48" of wall space. It can be pulled a max of 3", taking up 51" of wall space. The door width is 21-1/4", the stile width is 7-3/8" and the blind opening width is 18-3/4". A filler must be used between the blind and the adjacent cabinet so the doors and drawers are able to open without interference. The filler must be purchased separately.