Union White

Width 96" | Height 6" | Depth .75"

Molding extension that is used with starter molding (SKU: STRM-8) to make it easier to install molding on the tops of cabinets. The molding extension can be used without the starter molding, but it would first need a cleat support installed on site.

Width 96" | Height 6" | Depth .75"

Shiplap interlocking molding commonly used for walls, backsplash, or the backs of islands and peninsulas.

Width 30" | Height 40-5/16" | Depth 19"

Euro style wood hood that comes with a stainless steel liner. The chimney height of 23-1/2" can be trimmed on site, if needed. Blower is not included and would need to be purchased separately. The chimney depth is 9-11/16" and the width is 11-3/8".

Width 36" | Height 40-5/16" | Depth 19"

Euro style wood hood that comes with a stainless steel liner. The chimney height of 23-1/2" can be trimmed on site, if needed. Blower is not included and would need to be purchased separately. The chimney depth is 9-11/16" and the width is 17-3/8".

Width 42" | Height 40-5/16" | Depth 19"

Euro style wood hood that comes with a stainless steel liner. The chimney height of 23-1/2" can be trimmed on site, if needed. Blower is not included and would need to be purchased separately. The chimney depth is 9-11/16" and the width is 23-3/8".

Width 30" | Height 54-3/4" | Depth 19"

Farmhouse style wood hood that comes with a stainless steel liner. The chimney height of 23-1/2" can be trimmed on site, if needed. Blower is not included and would need to be purchased separately. The chimney depth is 13-7/16" and the width is 18-15/16".

Width 36" | Height 54-3/4" | Depth 19"

Farmhouse style wood hood that comes with a stainless steel liner. The chimney height of 23-1/2" can be trimmed on site, if needed. Blower is not included and would need to be purchased separately. The chimney depth is 13-7/16" and the width is 24-15/16".

Width 42" | Height 54-3/4" | Depth 19"

Farmhouse style wood hood that comes with a stainless steel liner. The chimney height of 23-1/2" can be trimmed on site, if needed. Blower is not included and would need to be purchased separately. The chimney depth is 13-7/16" and the width is 30-15/16".

Width 36" | Height 12" | Depth .75"

Arched recessed panel valance that can be trimmed up to 3" on each side.

Width 36" | Height 5.5" | Depth .75"

Arched valance. The width of the flat section on either side of the arch is 6" and it can be trimmed up to 3" on each side.

Width 3" | Height 30" | Depth .75"

Filler, with both long edges finished.

Width 3" | Height 36" | Depth .75"

Wall filler. Both long sides of the filler are finished.