Tuscan Timber

Width 96" | Height 1.25" | Depth 1.25"

Outside corner molding. Inside height and depth is 7/8".

Width 96"

Small cove molding, when installed, it will be 2-1/8" high and will stick out from the cabinet 2-1/8".

Width 96"

Cove crown molding, when installed, it will be 2-1/2" high and will stick out from the cabinet 2-7/8".

Width 60" | Height 34.5" | Depth 21"

Vanity sink and drawer base combo cabinet with (2) 11-3/4" wide doors and (1) 6-3/4" high false drawer front on either side of the cabinet. There will be (3) functional drawers in the middle, (1) 11-1/2"W x 6-3/4"high drawer on top and (2) 11-1/2" wide drawers on bottom. This cabinet will not have any shelves. This vanity has the option to add a decorative platform and feet, scroll through the cabinetry images to view the two platform styles: shaker or vera, along with the two feet styles: cove or taper. The images will be shown in white but will match the finish being ordered. The cove and taper feet include adjustable plastic leveling feet for easy adjustment on uneven surfaces. The leveling foot projects 1/16" when fully retracted to elevate the feet off the finished floor and is extendable up to 1/2". The leveling foot comes pre-attached to the decorative feet and is non-removable. The platform and feet will ship loose, to be installed on-site. *If a decorative platform and feet option is selected, the cabinet will also come with finished sides.*

Width 96" | Height .75" | Depth 1.5"

Light rail molding, overall depth is 1-1/2", the flat part that will install under the wall cabinets is 3/4" deep. The lip that will extend over the front of the wall cabinet is 1/4" high.

Width 96"

Large crown molding, when installed, it will be 3-3/8" high and will stick out from the cabinet 3".

Width 60" | Height 34.5" | Depth 21"

Vanity sink and drawer base combo cabinet with (2) 14-3/4" wide doors and (1) 6-3/4" high false drawer front in the middle of the cabinet. There will be (3) functional drawers on either end of the cabinet, (1) 14-1/2"W x 6-3/4"H drawer on top and (2) 14-1/2"W x 11-1/4"H drawers on bottom. This cabinet will not have any shelves. This vanity has the option to add a decorative platform and feet, scroll through the cabinetry images to view the two platform styles: shaker or vera, along with the two feet styles: cove or taper. The images will be shown in white but will match the finish being ordered. The cove and taper feet include adjustable plastic leveling feet for easy adjustment on uneven surfaces. The leveling foot projects 1/16" when fully retracted to elevate the feet off the finished floor and is extendable up to 1/2". The leveling foot comes pre-attached to the decorative feet and is non-removable. The platform and feet will ship loose, to be installed on-site. *If a decorative platform and feet option is selected, the cabinet will also come with finished sides.*

Width 96" | Height 5.25" | Depth .625"

Base board molding. Please note this base molding is slightly taller to account for uneven flooring and may need to have the height cut if needed, on site.

Width 96" | Height .25" | Depth .75"

Simple scribe molding.

Width 96" | Height 1.25" | Depth .375"

Decorative scribe molding. Flat front section is 3/4" high.

Width 96" | Height " | Depth .75"

Small batten molding.

Width 96" | Height 4.5" | Depth .25"

Toe kick made of MDF.