Tuscan Timber

Width 48" |Height 2.5" |Depth 10"

Floating plywood shelf with a walnut finish that will include the mounting brackets and hardware. The weight limit is 15 lbs/linear foot as long as the proper installation instructions are followed (instructions will be included with the shelf).

Width 33" | Height 90" | Depth 24"

Oven cabinet with two 17-1/2" high doors on top, and 1, 2 or 3 drawers on bottom. Single ovens will have 3 drawers, Combo ovens will have 2 drawers and Double ovens will have 1 drawer. There will be a fixed shelf located above the uppermost drawer for each oven option.

• The top drawer front is 6-3/4" high and the middle and bottom drawer fronts are 11-1/4" high.
• When using a single oven, the minimum opening measurements will be 27"W x 28-1/2"H, it can be widened on site to a maximum of 31"W x 37"H.
• When using as a combo oven, the minimum opening measurements will be 27"W x 39 3/8"H, it can be widened to a maximum of 31"W x 44"H.
• When using as a double oven, the minimum opening measurements will be 27"W x 50-3/4"H, it can be widened on site to a maximum of 31"W x 55-1/2"H.

Width 48" |Height 30" |Depth 21"

Arched wood hood with an overall depth of 21", the depth of the main part of the hood (which goes against the wall) is 15". The top panel will lift up and the sides will be flush. If crown is being installed, it would be installed above the cabinet, not on the face frame. A full interior stainless steel hood liner will also be installed (liner can be removed on site, if needed, however a hood liner is strongly recommended to prevent the wood hood from getting burned and is required by code in many places. The interior hood liner dimensions are as follows:

• Rear width: 46-1/2€
• Front width: 41-7/8€
• Depth of 34-1/2€ section: 13-3/4€
• Depth of 29-7/8€ section: 4-1/2€€
• Max fan size: 46-1/2€ x 13-3/4€
• Note that a blower is not included and must be purchased separately

Width 33" | Height 96" | Depth 24"

Oven cabinet with two 23-1/2" high doors on top, and 1, 2 or 3 drawers on bottom. Single ovens will have 3 drawers, Combo ovens will have 2 drawers and Double ovens will have 1 drawer. There will be a fixed shelf located above the uppermost drawer for each oven option

• The top drawer front is 6-3/4" high and the middle and bottom drawer fronts are 11-1/4" high.
• When using a single oven, the minimum opening measurements will be 27"W x 28-1/2"H, it can be widened on site to a maximum of 31"W x 37"H.
• When using as a combo oven, the minimum opening measurements will be 27"W x 39 3/8"H, it can be widened to a maximum of 31"W x 44"H.
• When using as a double oven, the minimum opening measurements will be 27"W x 50-3/4"H, it can be widened on site to a maximum of 31"W x 55-1/2"H.

Width 33" | Height 24" | Depth 24"

Wall cabinet that has 2 doors and 1 shelf.

Width 33" | Height 42" | Depth 12"

2 door wall cabinet that has 3 adjustable shelves.

Width 33" | Height 34.5" | Depth 24"

2 door base cabinet with 1 three quarter depth adjustable shelf and 2 drawers.

Width 33" |Height 34.5" |Depth 24"

1 door blind base corner cabinet with 1 drawer and 1 shelf. The actual width is 33", but must be pulled at least 6-1/2" from the corner, taking up 39" of wall space. It can be pulled a max of 9-1/2", taking up 42" of wall space. The door width is 12-3/4", the stile width is 10-1/4" and the blind opening width is 9-3/4". A filler must be used between the blind and the adjacent cabinet so the doors and drawers are able to open without interference. The filler must be purchased separately. When selecting the blind location, it is as if facing the cabinet, if Left is selected, the blind will be on the left side of the cabinet and the door will be on the right side. The door will always be hinged on the side closes to the blind side of the cabinet (for example, a blind cabinet with the blind on the left side will have the door hinged on the left side as well). It cannot be hinged closest to the outside of the cabinet because it will restrict access trying to get in and out of the cabinet.

Width 48" | Height 34.5" | Depth 24"

2 door base cabinet with 1 three quarter depth adjustable shelf and 2 drawers. This cabinet will have a 2-5/8" center stile.

Width 48" | Height 34.5" | Depth 24"

1 door blind base corner cabinet with 1 drawer and 1 shelf. This cabinet can be placed all the way in the corner (without any pull) so it would take up 48" of wall space. It can be pulled a max of 3", taking up 51" of wall space. The door width is 21-1/4", the stile width is 7-3/8" and the blind opening width is 18-3/4". A filler must be used between the blind and the adjacent cabinet so the doors and drawers are able to open without interference. The filler must be purchased separately.

Width 48" | Height 34.5" | Depth 21"

Vanity sink and drawer base combo cabinet with (2) 11-3/4" wide doors in the middle, (1) 6-3/4" high false drawer front across the top of the entire cabinet, and (2) 11-1/2" high drawers on the left and right. This cabinet will not have any shelves. This vanity has the option to add a decorative platform and feet, scroll through the cabinetry images to view the two platform styles: shaker or vera, along with the two feet styles: cove or taper. The images will be shown in white but will match the finish being ordered. The cove and taper feet include adjustable plastic leveling feet for easy adjustment on uneven surfaces. The leveling foot projects 1/16" when fully retracted to elevate the feet off the finished floor and is extendable up to 1/2". The leveling foot comes pre-attached to the decorative feet and is non-removable. The platform and feet will ship loose, to be installed on-site. *If a decorative platform and feet option is selected, the cabinet will also come with finished sides.*

Width 33" | Height 15" | Depth 12"

Wall cabinet that has 2 doors and no shelves.