Tuscan Timber

Width 13-3/4" | Height 16" | Depth 21"

Trash pull-out for a 18" or 21" base cabinet (two 29 quart waste baskets included). Trash pullout will be a natural finish and will not be pre-installed in cabinet (cabinet must be ordered separately). Includes door mounting kit and full extension, soft-closing glides.

Width 1.5" | Height 96" | Depth 24"

Refrigerator end panel with 1-1/2" stile on the front. The panel itself is 3/4" thick.

Width 33" | Height 90" | Depth 24"

Oven cabinet with two 17-1/2" high doors on top, and 1, 2 or 3 drawers on bottom. Single ovens will have 3 drawers, Combo ovens will have 2 drawers and Double ovens will have 1 drawer. There will be a fixed shelf located above the uppermost drawer for each oven option.

• The top drawer front is 6-3/4" high and the middle and bottom drawer fronts are 11-1/4" high.
• When using a single oven, the minimum opening measurements will be 27"W x 28-1/2"H, it can be widened on site to a maximum of 31"W x 37"H.
• When using as a combo oven, the minimum opening measurements will be 27"W x 39 3/8"H, it can be widened to a maximum of 31"W x 44"H.
• When using as a double oven, the minimum opening measurements will be 27"W x 50-3/4"H, it can be widened on site to a maximum of 31"W x 55-1/2"H.

Width 48" |Height 30" |Depth 21"

Arched wood hood with an overall depth of 21", the depth of the main part of the hood (which goes against the wall) is 15". The top panel will lift up and the sides will be flush. If crown is being installed, it would be installed above the cabinet, not on the face frame. A full interior stainless steel hood liner will also be installed (liner can be removed on site, if needed, however a hood liner is strongly recommended to prevent the wood hood from getting burned and is required by code in many places. The interior hood liner dimensions are as follows:

• Rear width: 46-1/2€
• Front width: 41-7/8€
• Depth of 34-1/2€ section: 13-3/4€
• Depth of 29-7/8€ section: 4-1/2€€
• Max fan size: 46-1/2€ x 13-3/4€
• Note that a blower is not included and must be purchased separately

Width 33" | Height 96" | Depth 24"

Oven cabinet with two 23-1/2" high doors on top, and 1, 2 or 3 drawers on bottom. Single ovens will have 3 drawers, Combo ovens will have 2 drawers and Double ovens will have 1 drawer. There will be a fixed shelf located above the uppermost drawer for each oven option

• The top drawer front is 6-3/4" high and the middle and bottom drawer fronts are 11-1/4" high.
• When using a single oven, the minimum opening measurements will be 27"W x 28-1/2"H, it can be widened on site to a maximum of 31"W x 37"H.
• When using as a combo oven, the minimum opening measurements will be 27"W x 39 3/8"H, it can be widened to a maximum of 31"W x 44"H.
• When using as a double oven, the minimum opening measurements will be 27"W x 50-3/4"H, it can be widened on site to a maximum of 31"W x 55-1/2"H.

Width 24" | Height 34.5" | Depth 21"

Vanity base cabinet with (2) doors, (1) drawer and (1) shelf. The drawer front is 6-3/4" high. This vanity has the option to add a decorative platform and feet, scroll through the cabinetry images to view the two platform styles: shaker or vera, along with the two feet styles: cove or taper. The images will be shown in white but will match the finish being ordered. The cove and taper feet include adjustable plastic leveling feet for easy adjustment on uneven surfaces. The leveling foot projects 1/16" when fully retracted to elevate the feet off the finished floor and is extendable up to 1/2". The leveling foot comes pre-attached to the decorative feet and is non-removable. The platform and feet will ship loose, to be installed on-site. *If a decorative platform and feet option is selected, the cabinet will also come with finished sides.*

Width 30" | Height 34.5" | Depth 21"

Vanity base cabinet with (2) doors, (1) drawer and (1) shelf. The drawer front is 6-3/4" high. This vanity has the option to add a decorative platform and feet, scroll through the cabinetry images to view the two platform styles: shaker or vera, along with the two feet styles: cove or taper. The images will be shown in white but will match the finish being ordered. The cove and taper feet include adjustable plastic leveling feet for easy adjustment on uneven surfaces. The leveling foot projects 1/16" when fully retracted to elevate the feet off the finished floor and is extendable up to 1/2". The leveling foot comes pre-attached to the decorative feet and is non-removable. The platform and feet will ship loose, to be installed on-site. *If a decorative platform and feet option is selected, the cabinet will also come with finished sides.*

Width 1.5" | Height 96" | Depth 24"

Refrigerator end panel with 1-1/2" stile on the front. The panel itself is 3/4" thick.

Width 36" |Height 34.5" |Depth 24"

Sink base cabinet with 2 doors and 2 false drawer fronts. This cabinet will have no shelves.

Width 27" | Height 34.5" | Depth 24"

2 door base cabinet with 1 three quarter depth adjustable shelf and 1 drawer.

Width 33" | Height 24" | Depth 24"

Wall cabinet that has 2 doors and 1 shelf.

Width 30" | Height 34.5" | Depth 24"

2 door base cabinet with 1 three quarter depth adjustable shelf and 1 drawer.