Tuscan Timber

Width 27" | Height 42" | Depth 12"

2 door wall cabinet that has 3 adjustable shelves.

Width 27" | Height 34.5" | Depth 24"

2 door base cabinet with 1 three quarter depth adjustable shelf and 1 drawer.

Width 27" |Height 34.5" |Depth 24"

1 door blind base corner cabinet with 1 drawer and 1 shelf. The actual width is 27", but must be pulled at least 9-1/2" from the corner, taking up 36" of wall space. It can be pulled a max of 12", taking up 39" of wall space. The door width is 9-3/4", the stile width is 9-1/2" and the blind opening width is 7-1/4". A filler must be used between the blind and the adjacent cabinet so the doors and drawers are able to open without interference. The filler must be purchased separately.

Width 17" | Height 18" | Depth 12"

Appliance garage with a front width of 17". It will have a roll up, tambour door and is designed to fit under a 24x24 diagonal corner wall cabinet. The door opening is approximately 14" wide, the tambour door is partially inserted into the frame on either side.

Width 27" | Height 30" | Depth 12"

2 door wall cabinet that has 2 adjustable shelves.

Width 27" | Height 36" | Depth 12"

2 door wall cabinet that has 3 adjustable shelves.

Width 27" | Height 34.5" | Depth 24"

3 drawer base cabinet. Top drawer front is 6-3/4" high, middle and bottom drawer fronts are 11-1/4" high.

Width 3" | Height 96" | Depth .75"

Tall filler. The 2 long sides of the filler will be finished.

Width 27" | Height 42" | Depth 15"

Diagonal corner wall cabinet with 3 adjustable shelves. This cabinet will take up 27" of wall space going out from the corner on each wall. This cabinet will have a partial overlay door to ensure it opens without hitting the adjacent cabinet, so there will be about 1-1/8" of face frame, visible on either side of the door. The distance from the front middle of the cabinet to the back middle of the cabinet is 27".

Width 3" | Height 34.5" | Depth 24"

Appliance end panel with a 3" stile on the front. Can be trimmed down to 1" wide if necessary. Panel is 1/2" thick plywood.

Width 3" | Height 96" | Depth 24"

Refrigerator end panel with 3" stile on the front. The panel itself is 3/4" thick.

Width 3" | Height 30" | Depth .75"

Filler, with both long edges finished.