Tuscan Stone

Width 96" | Height 5.5" | Depth .75"

Straight valance.

Width 17" | Height 18" | Depth 12"

Appliance garage with a front width of 17". It will have a roll up, tambour door and is designed to fit under a 24x24 diagonal corner wall cabinet. The door opening is approximately 14" wide, the tambour door is partially inserted into the frame on either side.

Width 96" | Height 5.25" | Depth .625"

Base board molding. Please note this base molding is slightly taller to account for uneven flooring and may need to have the height cut if needed, on site.

Width 96" | Height " | Depth 1.25"

Large batten molding.

Width 96" | Height " | Depth .75"

Small batten molding.

Width 96"

Cove crown molding, when installed, it will be 2-1/2" high and will stick out from the cabinet 2-7/8".

Width 96" | Height 1.25" | Depth .375"

Decorative scribe molding. Flat front section is 3/4" high.

Width 96"

Extra large cove crown molding. When installed, it will be 5-1/2" high and will stick out from the cabinet 5-1/2".

Width 96" | Height .75" | Depth .75"

Inside corner molding.

Width 96"

Large cove crown molding. When installed, it will be 4-1/2" high and will stick out from the cabinet 4-1/2".

Width 96"

Large crown molding, when installed, it will be 3-3/8" high and will stick out from the cabinet 3".

Width 96" | Height .75" | Depth 1.5"

Light rail molding, overall depth is 1-1/2", the flat part that will install under the wall cabinets is 3/4" deep. The lip that will extend over the front of the wall cabinet is 1/4" high.