Tuscan Painted Grey

Width 96"

Extra large cove crown molding. When installed, it will be 5-1/2" high and will stick out from the cabinet 5-1/2".

Width 96"

Large cove crown molding. When installed, it will be 4-1/2" high and will stick out from the cabinet 4-1/2".

Width 96" | Height 6" | Depth .75"

Molding extension that is used with starter molding (SKU: STRM-8) to make it easier to install molding on the tops of cabinets. The molding extension can be used without the starter molding, but it would first need a cleat support installed on site.

Width 96" | Height 6" | Depth .75"

Shiplap interlocking molding commonly used for walls, backsplash, or the backs of islands and peninsulas.

Width 96" | Height .75" | Depth 2.5"

Stacking molding to be used as a decorative piece between cabinets that are getting stacked one above the other. This hides the 'cabinet seam' that you would normally see without a decorative molding in between or applied over the seam.

Width 96" | Height .75" | Depth 1.5"

Starter molding that is installed above wall and tall cabinets which acts as a cleat for a molding extension (SKU: MEX-8), to make it easier to mount moldings on top of the cabinets. The starter molding and molding extension are ideal to use when mounting crown molding all the way to the ceiling.

Width 15" | Height 34.5" | Depth 24"

4 drawer base cabinet. Top 3 drawer fronts are 6-3/4" high and the bottom drawer front is 9" high.

Width 15" | Height 34.5" | Depth 24"

1 door base cabinet with 1 three quarter depth adjustable shelf and 1 drawer.

Width 15" | Height 34.5" | Depth 24"

3 drawer base cabinet. Top drawer front is 6-3/4" high, middle and bottom drawer fronts are 11-1/4" high.

Width 15" | Height 34.5" | Depth 24"

1 full height door base cabinet with 2 shelves (shelves will not be included if roll outs are added).

Width 15" | Height 34.5" | Depth 21"

Full height door vanity base cabinet with (2) adjustable 15" deep shelves.

Width 15" | Height 34.5" | Depth 21"

3-drawer vanity base cabinet. Top drawer front is 6-3/4", middle and bottom drawer fronts are 11-1/4" high. There will be a 2" clearance between the drawers and back panel.