Tuscan Cloud

Width 21" | Height 34.5" | Depth 24"

4 drawer base cabinet. Top 3 drawer fronts are 6-3/4" high and the bottom drawer front is 9" high.

Width 21" | Height 34.5" | Depth 24"

1 door base cabinet with 1 three quarter depth adjustable shelf and 1 drawer.

Width 21" | Height 34.5" | Depth 24"

3 drawer base cabinet. Top drawer front is 6-3/4" high, middle and bottom drawer fronts are 11-1/4" high.

Width 21" | Height 34.5" | Depth 24"

1 full height door base cabinet with 2 shelves (shelves will not be included if roll outs are added).

Width 21" | Height 15" | Depth 12"

Wall cabinet that has 1 door and no shelves.

Width 21" | Height 30" | Depth 12"

1 door wall cabinet that has 2 adjustable shelves.

Width 21" | Height 36" | Depth 12"

1 door wall cabinet that has 3 adjustable shelves.

Width 48" | Height 96" | Depth .5"

Back panel that is made of 1/2" thick plywood. Only 1 side will be finished, all edges and opposite side will be unfinished.

Width 48" | Height 96" | Depth .25"

Back panel that is made of 1/4" thick MDF. Only 1 side will be finished, all edges and opposite side will be unfinished.

Width 48" | Height 96" | Depth .75"

Back panel that is made of 3/4" thick plywood. Only 1 side will be finished, all edges and opposite side will be unfinished.

Width 42" | Height 12" | Depth .75"

Arched raised panel valance that can be trimmed up to 3" on each side.

Width 42" | Height 30" | Depth 21"

Arched wood hood with an overall depth of 21", the depth of the main part of the hood (which goes against the wall) is 15". The top panel will lift up and the sides will be flush. If crown is being installed, it would be installed above the cabinet, not on the face frame. A full interior stainless steel hood liner will also be installed (liner can be removed on site, if needed, however a hood liner is strongly recommended to prevent the wood hood from getting burned and is required by code in many places. The interior hood liner dimensions are as follows:

• Rear width: 40-1/2”
• Front width: 35-7/8”
• Depth of 34-1/2” section: 13-3/4”
• Depth of 29-7/8” section: 4-1/2”
• Max fan size: 40-1/2” x 13-3/4”
• Note that a blower is not included and must be purchased separately