Township White

Width 13-3/4" | Height 16" | Depth 21"

Trash pull-out for a 18" or 21" base cabinet (two 29 quart waste baskets included). Trash pullout will be a natural finish and will not be pre-installed in cabinet (cabinet must be ordered separately). Includes door mounting kit and full extension, soft-closing glides.

Width 96" | Height 3/4" | Depth 2-1/2"

Bead molding which is commonly used between cabinets when stacking, or to cover or transition architectural elements, decorative riser piece, etc...

Width 96" | Height 2-1/2" | Depth 2"

Curved crown molding that will have a height of 2-1/2" once installed and will stick out 2" from the cabinet.

Width 96" | Height 48" | Depth 1/4"

Finished plywood panel that can be trimmed to finish the back of an island or other cabinets. The panel will be finished on both sides but not the edges.

Width 96" | Height 48" | Depth .75"

Finished plywood panel that can be trimmed to finish the back of an island or other cabinets. This panel can also be used as refrigerator panel if one is needed that is deeper than 24". It comes finished on one side, and one of the long and short edges.

Width 96" | Height 3-1/2" | Depth 2-7/8"

Large curved crown molding that will have a height of 3-1/2" once installed and will stick out 2-7/8" from the cabinet.

Width 96" | Height 2" | Depth 2-1/2"

Light rail molding.

Width 96" | Height 1" | Depth 1"

Outside corner moldingthat comes in 8 ft long sections.

Width 96" | Height 3/4" | Depth 2-1/2"

Single bead molding which is commonly used between cabinets when stacking, or to cover or transition architectural elements, decorative riser piece, etc...

Width 96" | Height 1/4" | Depth 3/4"

Scribe molding that comes in 8 ft long sections.

Width 96" | Height 4-1/2"| Depth 1/2"

Toe kick molding that comes in 8 ft sections.

Width 96" | Height 4-1/2" | Depth

Base board molding that comes in 8 ft sections. Commonly used as a decorative molding around base cabinets or islands.