Township White

Width 45" | Height 34-1/2" | Depth 24"

Full height door blind corner base cabinet that can be pulled up to 3" from the wall so it will occupy anywhere from 45" to 48" of wall sapce. It has an 17-1/2" wide door, no drawers and a fixed center shelf. The blind opening is 15" wide. A 1" filler or greater will be needed to go adjacent to the blind cabinet so the door will open properly (filler needs to be purchased separately). A separate toe kick would also need to be used with any blind cabinet, to ensure the gap between the filler and blind isn't seen.

Width 45" | Height 34-1/2" | Depth 24"

Full height door blind corner base cabinet that can be pulled up to 3" from the wall so it will occupy anywhere from 45" to 48" of wall sapce. It has an 17-1/2" wide door, and no drawers or shelves. The blind opening is 15" wide. The pullout hardware includes 4 trays that will store inside the cabinet. 2 are attached to the door which will pullout once the door is open. A 1" filler or greater will be needed to go adjacent to the blind cabinet so the door will open properly (filler needs to be purchased separately). A separate toe kick would also need to be used with any blind cabinet, to ensure the gap between the filler and blind isn't seen.

Width 3" | Height 34-1/2" | Depth 3/4"

Base filler that can be trimmed to desire width and height.

Width 96" | Height 3/4" | Depth 2-1/2"

Bead molding which is commonly used between cabinets when stacking, or to cover or transition architectural elements, decorative riser piece, etc...

Width 96" | Height 2-1/2" | Depth 2"

Curved crown molding that will have a height of 2-1/2" once installed and will stick out 2" from the cabinet.

Width 3" | Height 34-1/2" | Depth 24"

Dishwasher end panel with a 3" wide filler on the front. Can be installed on the left or right. Commonly used next to an exposed appliance, like a dishwasher.

Width 3" | Height 30" | Depth 3/4"

Wall filler that can be trimmed to desire width and height.

Width 3" | Height 36" | Depth 3/4"

Wall filler that can be trimmed to desire width and height.

Width 3" | Height 42" | Depth 3/4"

Wall filler that can be trimmed to desire width and height.

Width 3" | Height 96" | Depth 3/4"

Tall filler that can be trimmed to desire width and height.

Width 96" | Height 48" | Depth 1/4"

Finished plywood panel that can be trimmed to finish the back of an island or other cabinets. The panel will be finished on both sides but not the edges.

Width 96" | Height 48" | Depth .75"

Finished plywood panel that can be trimmed to finish the back of an island or other cabinets. This panel can also be used as refrigerator panel if one is needed that is deeper than 24". It comes finished on one side, and one of the long and short edges.