Township White

Width 12" | Height 34-1/2" | Depth 24"

1 door base cabinet that has 1 adjustable, full depth shelf and 1 drawer.

Width 12" | Height 34-1/2" | Depth 24"

Full height door cabinet with 2 shelves that is meant to be used at the left end of a cabinet run. It will have a 24" deep side on the right which gets installed against the adjacent cabinet. The exposed side of the cabinet (on the left) will be 12" deep.

Width 12" | Height 34-1/2" | Depth 24"

Full height door cabinet with 2 shelves that is meant to be used at the right end of a cabinet run. It will have a 24" deep side on the left which gets installed against the adjacent cabinet. The exposed side of the cabinet (on the right) will be 12" deep.

Width 96" | Height 3/4" | Depth 2-1/2"

Bead molding which is commonly used between cabinets when stacking, or to cover or transition architectural elements, decorative riser piece, etc...

Width 96" | Height 2-1/2" | Depth 2"

Curved crown molding that will have a height of 2-1/2" once installed and will stick out 2" from the cabinet.

Width 12" | Height 34-1/2" | Depth 24"

3 drawer base cabinet that has (1) 6-1/2" drawer on top and (2) 10-3/4" drawers on bottom.

Width 96" | Height 48" | Depth 1/4"

Finished plywood panel that can be trimmed to finish the back of an island or other cabinets. The panel will be finished on both sides but not the edges.

Width 96" | Height 48" | Depth .75"

Finished plywood panel that can be trimmed to finish the back of an island or other cabinets. This panel can also be used as refrigerator panel if one is needed that is deeper than 24". It comes finished on one side, and one of the long and short edges.

Width 12" | Height 15" | Depth 12"

Wall glass door cabinet that has 1 door and no shelves. This cabinet will have a matching interior and includes clear glass.

Width 96" | Height 3-1/2" | Depth 2-7/8"

Large curved crown molding that will have a height of 3-1/2" once installed and will stick out 2-7/8" from the cabinet.

Width 96" | Height 2" | Depth 2-1/2"

Light rail molding.

Width 12" | Height 49-1/2" | Depth 3/4"

Pantry decorative base end panel to be used on the side of a tall cabinet or panel that will also match the door style. This would be used in conjunction with a 30", 36" or 42" high wall decorative end panel (depending on the height of the tall cabinet/panel, 30" for an 84" tall cabinet/panel, 36" for a 90" tall cabinet/panel, or 42" for a 96" tall cabinet/panel ). **PLEASE NOTE each panel is 12" wide so a quantity of (2) will need to be ordered and used side by side, along with (2) of the corresponding wall decorative end panels for the top. A total of 4 panels will be used on the side of a tall cabinet**.