Milan Pecan

Width 36" | Height 30" | Depth 24"

2 full height door base cabinet with (2) 18" deep adjustable shelves. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height. Please note that the shelves will not be included if roll outs are added to the cabinet.

Width 6" | Height 30" | Depth 3/4"

Base filler that comes as a flat panel and will not have a toe-kick recessed area on the bottom. It will be finished on two sides and edge-banded on all four edges.

Width 36" | Height 30" | Depth 24"

1 full height door blind base corner cabinet with no drawers and (2) 18" deep shelves. The actual width is 36", but the cabinet must be pulled at least 6" from the corner, taking up 42" of wall space. It can be pulled a max of 9", taking up 45" of wall space. The door width is 14-7/8" and the blind opening width is 14-11/32". A filler must be used between the blind and the adjacent cabinet so the doors and drawers are able to open without interference. The filler must be purchased separately. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 36" | Height 30" | Depth 24"

1 door blind base corner cabinet with 1 drawer and (1) 18" deep shelf. The drawer front height is 6-3/4". The actual width is 36", but the cabinet must be pulled at least 6" from the corner, taking up 42" of wall space. It can be pulled a max of 9", taking up 45" of wall space. The door width is 14-7/8" and the blind opening width is 14-11/32". A filler must be used between the blind and the adjacent cabinet so the doors and drawers are able to open without interference. The filler must be purchased separately. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 6" | Height 30" | Depth 3"

Corner filler that can be used instead of a blind corner cabinet. It will fill a gap between two cabinets in a corner, allowing the doors and drawers to still function properly, this will leave a void under the countertop.

Width 6" | Height 36" | Depth 3"

Corner filler that can be used instead of a blind corner cabinet. It will fill a gap between two cabinets in a corner, allowing the doors and drawers to still function properly, this will leave a void under the countertop.

Width 6" | Height 42" | Depth 3"

Corner filler that can be used instead of a blind corner cabinet. It will fill a gap between two cabinets in a corner, allowing the doors and drawers to still function properly, this will leave a void under the countertop.

Width 36" | Height 30" | Depth 24"

2 drawer base cabinet. Each drawer front measures 14-7/8" high. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 36" | Height 30" | Depth 24"

3 drawer base cabinet. Top drawer front is 6-3/4" high, middle and bottom drawer fronts are 11-7/16" separately. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 36" | Height 30" | Depth 24"

Full height door diagonal corner sink front that will take up 36" of wall space from the corner out, on each wall, once installed. The door width is 15-45/64" and it uses 45-degree hinges with Blumotion soft close. It will include the sink front floor as well as four black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height. No shelves will be included.

Width 36" | Height 30" | Depth 24"

Diagonal corner sink front that will take up 36" of wall space from the corner out, on each wall, once installed. The door width is 15-45/64" and it uses 45-degree hinges with Blumotion soft close. The false drawer front is 6-3/4" high. It will include the sink front floor as well as four black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height. No shelves will be included.

Width 6" | Height 34-1/2" | Depth 24-7/8"

Appliance end panel with a 3" return which consists of a filler interlocked with a 1/2" plywood return panel. The exposed sides will have near-flush finished ends. The front can be trimmed down to 1" wide if necessary (edge banding may be needed in order to finish the cut edge). The sides will be flush and finished and all four edges are edge-banded.