Milan Hazel

Width 3" | Height 36" | Depth 3"

Corner filler that can be used instead of a blind corner cabinet. It will fill a gap between two cabinets in a corner, allowing the doors and drawers to still function properly, this will leave a void under the countertop.

Width 6" | Height 36" | Depth 3"

Corner filler that can be used instead of a blind corner cabinet. It will fill a gap between two cabinets in a corner, allowing the doors and drawers to still function properly, this will leave a void under the countertop.

Width 3" | Height 36" | Depth 13-7/8"

Wall column that can be trimmed on site if needed. The sides will be flush and finished, and the back will be unfinished.

Width 3" | Height 96" | Depth 24-7/8"

Tall column that can be trimmed on site if needed. The sides will be flush and finished, and the back will be unfinished.

Width 30" | Height 36" | Depth 21"

Microwave wall cabinet that has (2) 14-7/8" high doors on top. The front panel is attached with clips for easy removal and install. Once removed, the opening will need to be cut, the maximum it can be cut is 28-1/2"W x 19-3/4"H, then the panel will be reattached back onto the cabinet. To avoid damage to the frame and side panels, please apply extra care when cutting the front panel, blue masking tape is the most commonly used to avoid splintering (strong adhesives must be avoided to avoid pulling the finish off). *Design note: if wainscot panels are applied to the left and right of this cabinet, since they are 3/4" thick, they should also be applied to both sides of the range space, to keep the dimensions aligned. **Note this cabinet has a 21" depth**

Width 13-7/8" | Height 96" | Depth 3"

Refrigerator end panel that is finished on both sides and edgebanded on all edges. The panel has a 3" filler attached to the front which will be flush with the sides.

Width 25-7/8" | Height 96" | Depth 3"

Refrigerator end panel that is finished on both sides and edgebanded on all edges. The panel has a 3" filler attached to the front which will be flush with the sides.

Width 24-7/8" | Height 96" | Depth 3/4"

Refrigerator end panel that is finished on both sides and edgebanded on all edges.

Width 30" | Height 96" | Depth 3"

Refrigerator end panel that is finished on both sides and edgebanded on all edges. The panel has a 3" filler attached to the front which will be flush with the sides.

Width 30" | Height 96" | Depth 3/4"

Refrigerator end panel that is finished on both sides and edgebanded on all edges.

Width 3" | Height 96" | Depth 3/4"

Tall filler that will be finished on two sides and edge-banded on all four edges.

Width 6" | Height 96" | Depth 3/4"

Tall filler that will be finished on two sides and edge-banded on all four edges.