Milan Hazel

Width 6" | Height 30" | Depth 3/4"

Base filler that comes as a flat panel and will not have a toe-kick recessed area on the bottom. It will be finished on two sides and edge-banded on all four edges.

Width 6" | Height 30" | Depth 3"

Corner filler that can be used instead of a blind corner cabinet. It will fill a gap between two cabinets in a corner, allowing the doors and drawers to still function properly, this will leave a void under the countertop.

Width 6" | Height 36" | Depth 3"

Corner filler that can be used instead of a blind corner cabinet. It will fill a gap between two cabinets in a corner, allowing the doors and drawers to still function properly, this will leave a void under the countertop.

Width 6" | Height 42" | Depth 3"

Corner filler that can be used instead of a blind corner cabinet. It will fill a gap between two cabinets in a corner, allowing the doors and drawers to still function properly, this will leave a void under the countertop.

Width 6" | Height 34-1/2" | Depth 24-7/8"

Appliance end panel with a 3" return which consists of a filler interlocked with a 1/2" plywood return panel. The exposed sides will have near-flush finished ends. The front can be trimmed down to 1" wide if necessary (edge banding may be needed in order to finish the cut edge). The sides will be flush and finished and all four edges are edge-banded.

Width 13-7/8" | Height 96" | Depth 3"

Refrigerator end panel that is finished on both sides and edgebanded on all edges. The panel has a 3" filler attached to the front which will be flush with the sides.

Width 6" | Height 96" | Depth 3/4"

Tall filler that will be finished on two sides and edge-banded on all four edges.

Width 6" | Height 30" | Depth 3/4"

Wall filler that will be finished on two sides and edge-banded on all four edges.

Width 6" | Height 36" | Depth 3/4"

Wall filler that will be finished on two sides and edge-banded on all four edges.

Width 6" | Height 42" | Depth 3/4"

Wall filler that will be finished on two sides and edge-banded on all four edges.

Width 13-7/8" | Height 83-7/8" | Depth 3/4"

Wainscot tall panel set of 2 doors, to be used on the exposed side of an 84" tall cabinet with a 13" depth. It will match the door style of the cabinets being ordered. The bottom door will be 49-1/2" high and the top door will match the remaining height of the cabinet. Wainscot panels will always be shipped loose and will need to be installed on site. The panel is deep enough to cover the side of the door, giving the door a built in look.

Width 13-7/8" | Height 89-7/8" | Depth 3/4"

Wainscot tall panel set of 2 doors, to be used on the exposed side of an 90" tall cabinet with a 13" depth. It will match the door style of the cabinets being ordered. The bottom door will be 49-1/2" high and the top door will match the remaining height of the cabinet. Wainscot panels will always be shipped loose and will need to be installed on site. The panel is deep enough to cover the side of the door, giving the door a built in look.