Milan Hazel

Width 3" | Height 36" | Depth 3"

Corner filler that can be used instead of a blind corner cabinet. It will fill a gap between two cabinets in a corner, allowing the doors and drawers to still function properly, this will leave a void under the countertop.

Width 6" | Height 36" | Depth 3"

Corner filler that can be used instead of a blind corner cabinet. It will fill a gap between two cabinets in a corner, allowing the doors and drawers to still function properly, this will leave a void under the countertop.

Width 3" | Height 36" | Depth 13-7/8"

Wall column that can be trimmed on site if needed. The sides will be flush and finished, and the back will be unfinished.

Width 30" | Height 36" | Depth 21"

Microwave wall cabinet that has (2) 14-7/8" high doors on top. The front panel is attached with clips for easy removal and install. Once removed, the opening will need to be cut, the maximum it can be cut is 28-1/2"W x 19-3/4"H, then the panel will be reattached back onto the cabinet. To avoid damage to the frame and side panels, please apply extra care when cutting the front panel, blue masking tape is the most commonly used to avoid splintering (strong adhesives must be avoided to avoid pulling the finish off). *Design note: if wainscot panels are applied to the left and right of this cabinet, since they are 3/4" thick, they should also be applied to both sides of the range space, to keep the dimensions aligned. **Note this cabinet has a 21" depth**

Width 24" | Height 79-1/2" | Depth 24"

Combo oven cabinet with two 11-7/8" high doors on top and two 11-7/16" high drawers on bottom (height is drawer front height). The oven cabinet has a full panel that will need to be cut on site, the maximum cutout is 22"W x 43-3/4"H. When using two appliances, it is recommended to provide support for the top appliance; PLY-3/4 can be used and would need to be purchased separately, and then installed on site. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 79-1/2" height.

Width 24" | Height 79-1/2" | Depth 24"

Double oven cabinet with two 11-7/8" high doors on top and one 11-7/16" high drawer on bottom (height is drawer front height). The oven cabinet has a full panel that will need to be cut on site, the maximum cutout is 22"W x 55"H. When using two appliances, it is recommended to provide support for the top appliance; PLY-3/4 can be used and would need to be purchased separately, and then installed on site. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 79-1/2" height.

Width 24" | Height 79-1/2" | Depth 24"

Single oven cabinet with two 11-7/8" high doors on top and three drawers on bottom. The top drawer front height is 6-3/4" and the middle and bottom drawer front heights are 11-7/16". The oven cabinet has a full panel that will need to be cut on site, the maximum cutout is 22"W x 36-3/4"H. When using two appliances, it is recommended to provide support for the top appliance; PLY-3/4 can be used and would need to be purchased separately, and then installed on site. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 79-1/2" height.

Width 30" | Height 79-1/2" | Depth 24"

Combo oven cabinet with two 11-7/8" high doors on top and two 11-7/16" high drawers on bottom (height is drawer front height). The oven cabinet has a full panel that will need to be cut on site, the maximum cutout is 28"W x 43-3/4"H. When using two appliances, it is recommended to provide support for the top appliance; PLY-3/4 can be used and would need to be purchased separately, and then installed on site. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 79-1/2" height.

Width 30" | Height 79-1/2" | Depth 24"

Double oven cabinet with two 11-7/8" high doors on top and one 11-7/16" high drawer on bottom (height is drawer front height). The oven cabinet has a full panel that will need to be cut on site, the maximum cutout is 28"W x 55"H. When using two appliances, it is recommended to provide support for the top appliance; PLY-3/4 can be used and would need to be purchased separately, and then installed on site. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 79-1/2" height.

Width 30" | Height 79-1/2" | Depth 24"

Single oven cabinet with two 11-7/8" high doors on top and three drawers on bottom. The top drawer front height is 6-3/4" and the middle and bottom drawer front heights are 11-7/16". The oven cabinet has a full panel that will need to be cut on site, the maximum cutout is 28"W x 36-3/4"H. When using two appliances, it is recommended to provide support for the top appliance; PLY-3/4 can be used and would need to be purchased separately, and then installed on site. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 79-1/2" height.

Width 15" | Height 79-1/2" | Depth 13"

Pantry cabinet that will have 2 doors; 1 shorter door on top and 1 taller door on bottom. The top door is 29-7/8" high and the bottom door is 49-13/32" high. There are 5 shelves that are 12" deep (shelves will be boxed separately from the pantry). Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 79-1/2" height.

Width 15" | Height 79-1/2" | Depth 24"

Pantry cabinet that will have 2 doors; 1 shorter door on top and 1 taller door on bottom. The top door is 29-7/8" high and the bottom door is 49-13/32" high. There are 5 shelves that are 21" deep (shelves will be boxed separately from the pantry). Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 79-1/2" height.