Milan Hazel

Width 24" | Height 30" | Depth 30"

2 door base cabinet with (1) 18" deep adjustable shelves and 1 drawer. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 96" | Height 4-1/2" | Depth 3/4"

Base board molding that is edge banded on all 4 edges.

Width 3" | Height 30" | Depth 3/4"

Base filler that comes as a flat panel and will not have a toe-kick recessed area on the bottom. It will be finished on two sides and edge-banded on all four edges.

Width 6" | Height 30" | Depth 3/4"

Base filler that comes as a flat panel and will not have a toe-kick recessed area on the bottom. It will be finished on two sides and edge-banded on all four edges.

Width 96" | Height 1-1/2" | Depth 3/4"

Light rail molding that must be used with the starter molding (STRM-8) to be flush with the front of the cabinet doors.

Width 24" | Height 85-1/2" | Depth 30"

Double oven cabinet with two 17-7/8" high doors on top and one 11-7/16" high drawer on bottom (height is drawer front height). The oven cabinet has a full panel that will need to be cut on site, the maximum cutout is 28"W x 55"H. When using two appliances, it is recommended to provide support for the top appliance; PLY-3/4 can be used and would need to be purchased separately, and then installed on site. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 85-1/2" height.

Width 48" | Height 108" | Depth 3/4"

Back panel that has one finished side. All edges and opposite side will be unfinished. There will be no edge banding but edge banding can be ordered and applied on site, if needed.

Width 24-7/8" | Height 96" | Depth 3/4"

Refrigerator end panel that is finished on both sides and edgebanded on all edges.

Width 30" | Height 96" | Depth 3/4"

Refrigerator end panel that is finished on both sides and edgebanded on all edges.

Width 3" | Height 96" | Depth 3/4"

Tall filler that will be finished on two sides and edge-banded on all four edges.

Width 6" | Height 96" | Depth 3/4"

Tall filler that will be finished on two sides and edge-banded on all four edges.

Width 96" | Height 4-1/2" | Depth 3/4"

Toe kick.