Milan Hazel

Width 96" | Height 4-1/2" | Depth 3/4"

Base board molding that is edge banded on all 4 edges.

Width 96" | Height 1-1/2" | Depth 3/4"

Light rail molding that must be used with the starter molding (STRM-8) to be flush with the front of the cabinet doors.

Width 13-7/8" | Height 96" | Depth 3"

Refrigerator end panel that is finished on both sides and edgebanded on all edges. The panel has a 3" filler attached to the front which will be flush with the sides.

Width 96" | Height 3/4" | Depth 1-1/2"

Starter molding that is installed above wall and tall cabinets which acts as a cleat for light rail molding (SKU: LRM), to make it easier to mount moldings on top of the cabinets. The starter molding and molding extension are ideal to use when mounting crown molding all the way to the ceiling. It can also be used with the straigh valance (SKU: VST-6) for a Soffit build up.

Width 96" | Height 4-1/2" | Depth 3/4"

Toe kick.

Width 96" | Height 6" | Depth 3/4"

Straight valance that can be used with the starter molding (SKU: STRM-8) for a Soffit build-up.

Width 13-7/8" | Height 83-7/8" | Depth 3/4"

Wainscot tall panel set of 2 doors, to be used on the exposed side of an 84" tall cabinet with a 13" depth. It will match the door style of the cabinets being ordered. The bottom door will be 49-1/2" high and the top door will match the remaining height of the cabinet. Wainscot panels will always be shipped loose and will need to be installed on site. The panel is deep enough to cover the side of the door, giving the door a built in look.

Width 13-7/8" | Height 89-7/8" | Depth 3/4"

Wainscot tall panel set of 2 doors, to be used on the exposed side of an 90" tall cabinet with a 13" depth. It will match the door style of the cabinets being ordered. The bottom door will be 49-1/2" high and the top door will match the remaining height of the cabinet. Wainscot panels will always be shipped loose and will need to be installed on site. The panel is deep enough to cover the side of the door, giving the door a built in look.

Width 13-7/8" | Height 95-7/8" | Depth 3/4"

Wainscot tall panel set of 2 doors, to be used on the exposed side of an 96" tall cabinet with a 13" depth. It will match the door style of the cabinets being ordered. The bottom door will be 49-1/2" high and the top door will match the remaining height of the cabinet. Wainscot panels will always be shipped loose and will need to be installed on site. The panel is deep enough to cover the side of the door, giving the door a built in look.

Width 13-7/8" | Height 12" | Depth 3/4"

Wainscot wall panel, to be used on the exposed side of a 12" high wall cabinet with a depth of 13". It will match the door style of the cabinets being ordered. Wainscot panels will always be shipped loose and will need to be installed on site. The panel is deep enough to cover the side of the door, giving the door a built in look.

Width 13-7/8" | Height 15" | Depth 3/4"

Wainscot wall panel, to be used on the exposed side of a 15" high wall cabinet with a depth of 13". Wainscot panels will always be shipped loose and will need to be installed on site. The panel is deep enough to cover the side of the door, giving the door a built in look.

Width 13-7/8" | Height 18" | Depth 3/4"

Wainscot wall panel, to be used on the exposed side of a 18" high wall cabinet with a depth of 13". Wainscot panels will always be shipped loose and will need to be installed on site. The panel is deep enough to cover the side of the door, giving the door a built in look.