Milan Cafe

Width 96" | Height 4-1/2" | Depth 3/4"

Base board molding that is edge banded on all 4 edges.

Width 3" | Height 30" | Depth 3/4"

Base filler that comes as a flat panel and will not have a toe-kick recessed area on the bottom. It will be finished on two sides and edge-banded on all four edges.

Width 6" | Height 30" | Depth 3/4"

Base filler that comes as a flat panel and will not have a toe-kick recessed area on the bottom. It will be finished on two sides and edge-banded on all four edges.

Width 96" | Height 1-1/2" | Depth 3/4"

Light rail molding that must be used with the starter molding (STRM-8) to be flush with the front of the cabinet doors.

Width 48" | Height 108" | Depth 3/4"

Back panel that has one finished side. All edges and opposite side will be unfinished. There will be no edge banding but edge banding can be ordered and applied on site, if needed.

Width 24-7/8" | Height 96" | Depth 3/4"

Refrigerator end panel that is finished on both sides and edgebanded on all edges.

Width 30" | Height 96" | Depth 3/4"

Refrigerator end panel that is finished on both sides and edgebanded on all edges.

Width 3" | Height 96" | Depth 3/4"

Tall filler that will be finished on two sides and edge-banded on all four edges.

Width 6" | Height 96" | Depth 3/4"

Tall filler that will be finished on two sides and edge-banded on all four edges.

Width 96" | Height 4-1/2" | Depth 3/4"

Toe kick.

Width 21-7/8" | Height 34-1/2" | Depth 3/4"

Vanity base end panel that is finished on two sides and edge-banded on all four edges.

Width 96" | Height 6" | Depth 3/4"

Straight valance that can be used with the starter molding (SKU: STRM-8) for a Soffit build-up.