Midtown Timber Shaker

Width 30" | Height 1.25" | Depth 12"

Stemware rack that has 7 slots for glasses.

Width 30" | Height 5" | Depth 21"

Vanity knee drawer that can be trimmed up to 24" if needed. The drawer front is 23-1/2" wide, then there will be 3-1/4" of trimmable space on either side of the drawer front. The interior height of the drawer is 2-1/2". It has side mounted, ball-bearing slides (not soft close).

Width 36" | Height 1.25" | Depth 12"

Stemware rack that has 8 slots for glasses.

Width 96" | Height 1.25" | Depth .375"

Decorative scribe molding. Flat front section is 3/4" high.

Width 11.5" | Height 29.5" | Depth "

Wainscot wall panel to be used on the exposed side of a 30"H x 12"D wall cabinet. It will match the door style of the cabinets being ordered.

Width 23.5" | Height 29.5" | Depth "

Wainscot base panel, to be used on the exposed side of a base cabinet. It will match the door style of the cabinets being ordered.

Width 96" | Height 1.25" | Depth 1.25"

Outside corner molding. Inside height and depth is 7/8".

Width 7/8" | Height 5" | Depth 7/8"

Toe kick cap made from solid wood that will match the finish of the collection. It is used to finish the exposed side of the toe kick end and will need to be cut on site, prior to installation.