Midtown Timber Shaker

Width 24" | Height 30" | Depth 12"

Wall blind cabinet with 2 adjustable shelves and a 7" stile. It can be installed right against the corner or pulled a maximum of 3" from the corner which would take up a total of 27" of wall space. Door width is 9-1/2" and the blind opening is 7" wide. A filler must be used between the blind and the adjacent cabinet so the doors are able to open without interference. The filler must be purchased separately.

Width 24" | Height 30" | Depth 12"

Corner wall cabinet with no door that is designed to be used with a glass door (sold separately). Cabinet will have a finished interior and 2 adjustable 1/4" thick glass shelves. It will take up 24" of wall space out from the corner on each wall.

Width 24" | Height 30" | Depth 12"

Diagonal corner wall cabinet with 2 adjustable shelves. This cabinet will take up 24" of wall space going out from the corner on each wall. This cabinet will have a partial overlay door to ensure it opens without hitting the adjacent cabinet, so there will be about 1-1/8" of face frame, visible on either side of the door. The distance from the front middle of the cabinet to the back middle of the cabinet is 22-5/8".

Width 24" | Height 30" | Depth 12"

Square corner wall cabinet with 2 adjustable shelves. This cabinet will take up 24" of wall space going out from the corner on each wall. This cabinet door will not have a soft close hinge.

Width 24" | Height 30" | Depth 12"

2 door wall cabinet that has 2 adjustable shelves.

Width 24" | Height 30" | Depth 12"

Wall cabinet with no doors that is designed to be used with glass doors (sold separately). Cabinet will have a finished interior, 2 adjustable 1/4" thick glass shelves, and pre-installed hinges.

Width 48" | Height 30" | Depth 21"

Arched wood hood with an overall depth of 21", the depth of the main part of the hood (which goes against the wall) is 15". The top panel will lift up and the sides will be flush. If crown is being installed, it would be installed above the cabinet, not on the face frame. A full interior stainless steel hood liner will also be installed (liner can be removed on site, if needed, however a hood liner is strongly recommended to prevent the wood hood from getting burned and is required by code in many places. The interior hood liner dimensions are as follows:

• Rear width: 46-1/2”
• Front width: 41-7/8”
• Depth of 34-1/2” section: 13-3/4”
• Depth of 29-7/8” section: 4-1/2””
• Max fan size: 46-1/2” x 13-3/4”
• Note that a blower is not included and must be purchased separately