Midtown Timber Shaker

Width 96" | Height .75" | Depth 1.5"

Starter molding that is installed above wall and tall cabinets which acts as a cleat for a molding extension (SKU: MEX-8), to make it easier to mount moldings on top of the cabinets. The starter molding and molding extension are ideal to use when mounting crown molding all the way to the ceiling.

Width 11.25" | Height 30" | Depth .25"

Wall skin that can be cut to size as needed.

Width 11.25" | Height 36" | Depth .25"

Wall skin that can be cut to size as needed.

Width 48" | Height 96" | Depth .25"

Back panel that is made of 1/4" thick MDF. Only 1 side will be finished, all edges and opposite side will be unfinished.

Width 11.25" | Height 42" | Depth .25"

Wall skin that can be cut to size as needed.

Width 23.25" | Height 96" | Depth .25"

Tall skin that can be cut to size as needed.

Width 23.25" | Height 34.5" | Depth .25"

Base skin to be used on the exposed side of a base or vanity cabinet (can be cut to size, as needed).

Width 96" | Height .75" | Depth 1.5"

Light rail molding, overall depth is 1-1/2", the flat part that will install under the wall cabinets is 3/4" deep. The lip that will extend over the front of the wall cabinet is 1/4" high.

Width 96" | Height 4.5" | Depth .25"

Toe kick made of MDF.