Midtown Timber Shaker

Width 54" | Height 12" | Depth .75"

Arched Recessed panel valance that can be trimmed up to 3" on each side.

Width 54" | Height 5.5" | Depth .75"

Arched valance. The width of the flat section on either side of the arch is 6" and it can be trimmed up to 3" on each side.

Width 54" | Height 2.5" | Depth 10"

Floating shelf that will include the mounting brackets and hardware. The weight limit is 15 lbs/linear foot as long as the proper installation instructions are followed (instructions will be included with the shelf).

Width 23.25" | Height 96" | Depth .25"

Tall skin that can be cut to size as needed.

Width 17" | Height 18" | Depth 12"

Appliance garage with a front width of 17". It will have a roll up, tambour door and is designed to fit under a 24x24 diagonal corner wall cabinet. The door opening is approximately 14" wide, the tambour door is partially inserted into the frame on either side.

Width 23.25" | Height 34.5" | Depth .25"

Base skin to be used on the exposed side of a base or vanity cabinet (can be cut to size, as needed).

Width 54" | Height 2.5" | Depth 10"

Floating plywood shelf with a walnut finish that will include the mounting brackets and hardware. The weight limit is 15 lbs/linear foot as long as the proper installation instructions are followed (instructions will be included with the shelf).