Midtown Cloud Shaker

Width 96" | Height .75" | Depth .75"

Outside corner molding. Inside height and depth is 5/8".

Width 96" | Height .75" | Depth .75"

Quarter round molding.

Width 96" | Height .75" | Depth 1.5"

Light rail molding, overall depth is 1-1/2", the flat part that will install under the wall cabinets is 3/4" deep. The lip that will extend over the front of the wall cabinet is 1/4" high.

Width 96" | Height .75" | Depth 1.5"

Starter molding that is installed above wall and tall cabinets which acts as a cleat for a molding extension (SKU: MEX-8), to make it easier to mount moldings on top of the cabinets. The starter molding and molding extension are ideal to use when mounting crown molding all the way to the ceiling.

Width 96" | Height .75" | Depth 2.5"

Stacking molding to be used as a decorative piece between cabinets that are getting stacked one above the other. This hides the 'cabinet seam' that you would normally see without a decorative molding in between or applied over the seam.

Width 96" | Height .75" | Depth .75"

Inside corner molding.

Width 24" | Height 39" | Depth 12"

2 door wall cabinet that has 3 adjustable shelves.

Width 24" | Height 39" | Depth 12"

Diagonal corner wall cabinet with 2 adjustable shelves. This cabinet will take up 24" of wall space going out from the corner on each wall. This cabinet will have a partial overlay door to ensure it opens without hitting the adjacent cabinet, so there will be about 1-1/8" of face frame, visible on either side of the door. The distance from the front middle of the cabinet to the back middle of the cabinet is 22-5/8".

Width 24" | Height 39" | Depth 12"

Square corner wall cabinet with 2 adjustable shelves. This cabinet will take up 24" of wall space going out from the corner on each wall. This cabinet door will not have a soft close hinge.