Midtown Cloud Shaker

Width 18" | Height 34.5" | Depth 21"

3-drawer vanity base cabinet. Top drawer front is 6-3/4", middle and bottom drawer fronts are 11-1/4" high. There will be a 2" clearance between the drawers and back panel.

Width 18" | Height 34.5" | Depth 24"

3 drawer base cabinet. Top drawer front is 6-3/4" high, middle and bottom drawer fronts are 11-1/4" high.

Width 18" | Height 34.5" | Depth 24"

4 drawer base cabinet. Top 3 drawer fronts are 6-3/4" high and the bottom drawer front is 9" high.

Width 18" | Height 34.5" | Depth 24"

1 door base cabinet with 1 three quarter depth adjustable shelf and 1 drawer.

Width 96" | Height .75" | Depth .75"

Outside corner molding. Inside height and depth is 5/8".

Width 96" | Height .75" | Depth .75"

Quarter round molding.

Width 96" | Height .75" | Depth 1.5"

Light rail molding, overall depth is 1-1/2", the flat part that will install under the wall cabinets is 3/4" deep. The lip that will extend over the front of the wall cabinet is 1/4" high.

Width 18" | Height 34.5" | Depth 24"

1 full height door base cabinet with 2 shelves (shelves will not be included if roll outs are added).

Width 96" | Height .75" | Depth 1.5"

Starter molding that is installed above wall and tall cabinets which acts as a cleat for a molding extension (SKU: MEX-8), to make it easier to mount moldings on top of the cabinets. The starter molding and molding extension are ideal to use when mounting crown molding all the way to the ceiling.

Width 96" | Height .75" | Depth 2.5"

Stacking molding to be used as a decorative piece between cabinets that are getting stacked one above the other. This hides the 'cabinet seam' that you would normally see without a decorative molding in between or applied over the seam.

Width 96" | Height .75" | Depth .75"

Inside corner molding.

Width 18" | Height 34.5" | Depth 21"

Vanity base cabinet with (1) door, (1) drawer and (1) shelf. The drawer front is 6-3/4" high.