Midtown Cloud Shaker

Width 6" | Height 30" | Depth 24"

Spice pull out to be used with a 6x30 filler (sold separately - see SKU WF630). It comes with chrome rails and full extension, ball bearing glides (not soft-close). It will have 3 adjustable shelves and is constructed of UV coated maple wood. The pullout must be installed between 2 cabinets and the 6" filler (SKU WF630) must be ordered separately. An additional overlay or decorative filler can be installed on the 6" filler if desired (also sold separately).

Width 6" | Height 30" | Depth 24"

Spice pull out to be used with a wall filler (sold separately). It comes with chrome rails and full extension, ball bearing glides (not soft-close). It will have 3 adjustable shelves and is constructed of UV coated maple wood. The pullout must be installed between 2 cabinets and the 6" wall filler must be ordered separately.

Width 48" | Height 30" | Depth 21"

Arched wood hood with an overall depth of 21", the depth of the main part of the hood (which goes against the wall) is 15". The top panel will lift up and the sides will be flush. If crown is being installed, it would be installed above the cabinet, not on the face frame. A full interior stainless steel hood liner will also be installed (liner can be removed on site, if needed, however a hood liner is strongly recommended to prevent the wood hood from getting burned and is required by code in many places. The interior hood liner dimensions are as follows:

• Rear width: 46-1/2€
• Front width: 41-7/8€
• Depth of 34-1/2€ section: 13-3/4€
• Depth of 29-7/8€ section: 4-1/2€€
• Max fan size: 46-1/2€ x 13-3/4€
• Note that a blower is not included and must be purchased separately

Width 6" | Height 30" | Depth 12"

Wine cube cabinet made of veneer plywood with wood edge banding. There are 5 cubes that will have finished interiors.

Width 6€ | Height 30€ | Depth 12€

Open end wall cabinet with 2 shelves. Shelves are not adjustable, and bottom panel will be curved at the edge. This cabinet will be open on the left side (installing on the right side). Please note there will be visible screws on the back and side of the cabinet, as they are intended to be installed against two walls, or a wall and adjacent cabinet.

Width 6€ | Height 30€ | Depth 12€

Open end wall cabinet with 2 shelves. Shelves are not adjustable, and bottom panel will be curved at the edge. This cabinet will be open on the right side (installing on the left side). Please note there will be visible screws on the back and side of the cabinet, as they are intended to be installed against two walls, or a wall and adjacent cabinet.

Width 6" | Height 30" | Depth .75"

Filler, with both long edges finished.