Midtown Cloud Shaker

Width 3" | Height 42" | Depth .75"

Wall filler. Both long sides of the filler are finished.

Width 6" | Height 42" | Depth .75"

Wall filler. Both long sides of the filler are finished.

Width 3" | Height 42" | Depth 15"

Wall column that can be trimmed on site if needed.

Width 3" | Height 42" | Depth 24"

Spice pull out to be used with a wall filler (sold separately). It comes with chrome rails and full extension, ball bearing glides (not soft-close). It will have 5 adjustable shelves and is constructed of UV coated maple wood. The pullout must be installed between 2 cabinets and the 3" wall filler must be ordered separately.

Width 3" | Height 42" | Depth 2.25"

Wall plain pilaster. The filler the pilaster is mounted on is 3/4" deep, the pilaster itself is 1-1/2" deep. Top and bottom sections above and below the pilaster are each 2" tall. 2" will need to be trimmed from the top or bottom before installation. **Pilasters are handmade and may therefore feature inconsistencies in shape or form. These are in no way considered defects**

Width 6" | Height 42" | Depth 24"

Spice pull out to be used with a wall filler (sold separately). It comes with chrome rails and full extension, ball bearing glides (not soft-close). It will have 3 adjustable shelves and is constructed of UV coated maple wood. The pullout must be installed between 2 cabinets and the 6" wall filler must be ordered separately.

Width 6" | Height 42" | Depth 12"

Wine cube cabinet made of veneer plywood with wood edge banding. There are 7 cubes that will have finished interiors.

Width 6€ | Height 42€ | Depth 12€

Open end wall cabinet with 3 shelves. Shelves are not adjustable, and bottom panel will be curved at the edge. This cabinet will be open on the left side (installing on the right side). Please note there will be visible screws on the back and side of the cabinet, as they are intended to be installed against two walls, or a wall and adjacent cabinet.

Width 6€ | Height 42€ | Depth 12€

Open end wall cabinet with 3 shelves. Shelves are not adjustable, and bottom panel will be curved at the edge. This cabinet will be open on the right side (installing on the left side). Please note there will be visible screws on the back and side of the cabinet, as they are intended to be installed against two walls, or a wall and adjacent cabinet.

Width 3" | Height 42" | Depth 12"

Wall column that can be trimmed on site if needed.