Linen Shaker

Width 11.5" | Height 14" | Depth .75"

Wall decorative end panel for the side of a 15" high wall cabinet.*The door will not get installed behind the face frame, it will be installed onto the frame. Then, 1/4" shims would be used on the opposite side so it's leveled. As an alternative, a 1/4" skin can be purchased instead and installed first, then the decorative door can install directly on the skin.*

Width 36" | Height 96" | Depth .75"

Used to create bookshelves or any custom item that requires a 3/4" thick shelf. Both sides of the panel are finished however, it is edge banded on only one of the 96" sides.

Width 96" | Height 4-1/2" | Depth 3/4"

Modern furniture base molding.

Width 48" | Height 6" | Depth .75"

Shaker arched valance. The height in the middle of the valance is 3".

Width 11.5" |Height 11" |Depth .75"

Wall decorative end panel for the side of a 12" high wall cabinet. *The door will not get installed behind the face frame, it will be installed onto the frame. Then, 1/4" shims would be used on the opposite side so it's leveled. As an alternative, a 1/4" skin can be purchased instead and installed first, then the decorative door can install directly on the skin.*

Width 11.5" | Height 17" | Depth .75"

Wall decorative end panel for the side of an 18" high wall cabinet.*The door will not get installed behind the face frame, it will be installed onto the frame. Then, 1/4" shims would be used on the opposite side so it's leveled. As an alternative, a 1/4" skin can be purchased instead and installed first, then the decorative door can install directly on the skin.*

Width 23.5" |Height 78.5" |Depth .75"

Tall decorative door set consisting of 2 doors. Commonly used for the sides of oven cabinets, pantry cabinets and refrigerator panels. There will be a horizontal decorative stile in the middle of the bottom decorative door.

*The door will not get installed behind the face frame, it will be installed onto the frame. Then, 1/4" shims would be used on the opposite side so it's leveled. As an alternative, a 1/4" skin can be purchased instead and installed first, then the decorative door can install directly on the skin.*

Width 23.5" |Height 84.5" |Depth .75"

Tall decorative door set consisting of 2 doors. Commonly used for the sides of oven cabinets, pantry cabinets and refrigerator panels.There will be a decorative horizontal stile in the middle of the bottom decorative door.

*The door will not get installed behind the face frame, it will be installed onto the frame. Then, 1/4" shims would be used on the opposite side so it's leveled. As an alternative, a 1/4" skin can be purchased instead and installed first, then the decorative door can install directly on the skin.*

Width 24" | Height 96" | Depth .75"

Used to create bookshelves or any custom item that requires a-3/4" thick shelf. Both sides of the panel are finished however, it is edge banded on only one of the 96" sides.

Width 23.5" |Height 90.5" |Depth .75"

Tall decorative door set consisting of 2 doors. Commonly used for the sides of oven cabinets, pantry cabinets and refrigerator panels. There will be a decorative horizontal stile in the middle of the bottom decorative door.

*The door will not get installed behind the face frame, it will be installed onto the frame. Then, 1/4" shims would be used on the opposite side so it's leveled. As an alternative, a 1/4" skin can be purchased instead and installed first, then the decorative door can install directly on the skin.*

Width 11.5" | Height 29" | Depth .75"

Wall decorative end panel.

*The door will not get installed behind the face frame, it will be installed onto the frame. Then, 1/4" shims would be used on the opposite side so it's leveled. As an alternative, a 1/4" skin can be purchased instead and installed first, then the decorative door can install directly on the skin.*

Width 1.5" | Height 96" | Depth 30"

Refrigerator end panel with a 1-1/2" stile on the front. The panel will be finished on both sides. The front edge of the panel is not finished so the stile must be used. Filler can be trimmed to 3/4" if necessary.