Charlotte White

Width 96" |Height 24" |Depth .75"

Finished panel on both sides with edge banding along all 4 edges. The edge banding will not be a perfect match to the finishing on the front of the panel. Scribe molding will also be included which can be installed (using either small finishing nails, which should be countersunk slightly, or glue) onto the edge banded side for a 100% match. If the Scribe molding is not needed, please select "No" by opening the Options button, otherwise Scribe will also be included with the panel.

Width 3" | Height 34-1/2" | Depth 3/4"

Base filler. Commonly used to fill gaps between cabinets and gaps between cabinets and appliances.

Width 96" | Height 36" | Depth 1/4"

Finished panel on both sides. Commonly used to finish the back of an island. Outside corner molding would be needed to finish the edges.

Width 96" | Height 36" | Depth .75"

Finished panel on both sides with edge banding along all 4 edges. The edge banding will not be a perfect match to the finishing on the front of the panel. Scribe molding will also be included which can be installed (using either small finishing nails, which should be countersunk slightly, or glue) onto the edge banded side for a 100% match. If the Scribe molding is not needed, please select "No" by opening the Options button, otherwise Scribe will also be included with the panel.

Width 3" | Height 34-1/2" | Depth 3"

Turned decorative post.

Width 3" | Height 30" | Depth 3/4"

Wall filler.

Width 3" | Height 36" | Depth 3/4"

Wall filler.

Width 3" | Height 4" | Depth 3/8"

Block accent commonly used on the bottom of a fluted filler.

Width 3" | Height 42" | Depth 3/4"

Wall filler.

Width 3" | Height 96" | Depth 3/4"

Fluted filler that can be trimmed as needed.

Width 3" | Height 96" | Depth 3/4"

Tall filler.

Width 96" |Height 48" |Depth .75"

Finished panel on both sides with edge banding along all 4 edges. The edge banding will not be a perfect match to the finishing on the front of the panel. Scribe molding will also be included which can be installed (using either small finishing nails, which should be countersunk slightly, or glue) onto the edge banded side for a 100% match. If the Scribe molding is not needed, please select "No" by opening the Options button, otherwise Scribe will also be included with the panel.