Belfast White

Width 42" | Height 34.5" | Depth 24"

2 door base cabinet with 1 half depth adjustable shelf and 2 drawers. This cabinet will have a 7/8" center stile.

Width 42" | Height 34.5" | Depth 24"

Sink base cabinet with 2 doors and 2 false drawer fronts. This cabinet will have no shelves.

Width 42" | Height 34.5" | Depth 21"

Vanity sink and drawer base combo cabinet with (1) 17-1/2" wide door in the middle, (1) 6-3/4" high false drawer front across the top of the entire cabinet, and (2) 11-1/2" high drawers on the left and right. This cabinet will not have any shelves.

Width 42" | Height 30" | Depth 12"

Wall blind cabinet with 2 adjustable shelves and a 6" stile. It can be installed right against the corner or pulled a maximum of 3" from the corner which would take up a total of 45" of wall space. Door width is 14-1/8" and the blind opening is 25-7/8" wide. A filler must be used between the blind and the adjacent cabinet so the doors are able to open without interference. The filler must be purchased separately.

Width 42" | Height 30" | Depth 12"

2 door wall cabinet that has 2 adjustable shelves. This cabinet will have a 7/8" center stile.

Width 96" | Height 5.5" | Depth .75"

Straight valance.

Width 96" | Height 5.25" | Depth .625"

Base board molding. Please note this base molding is slightly taller to account for uneven flooring and may need to have the height cut if needed, on site.

Width 96" | Height .75" | Depth "

Dentil molding inlay to be used with the Royal Crown Molding (SKU TCM).

Width 96" | Height .75" | Depth .75"

Inside corner molding.

Width 96" | Height .75" | Depth 1.5"

Light rail molding, overall depth is 1-1/2", the flat part that will install under the wall cabinets is 3/4" deep. The lip that will extend over the front of the wall cabinet is 1/4" high.

Width 96" | Height .75" | Depth .75"

Outside corner molding. Inside height and depth is 5/8".

Width 96" | Height .75" | Depth "

Rope molding inlay to be used with the Royal Crown Molding (SKU TCM).