Artisan Walnut Shaker

Width 3" | Height 96" | Depth 2.25"

Trimmable decorative accent pilaster/post.

Width 3" | Height 96" | Depth 27"

Wall column box (will come as one piece). This is trimmable to a custom height, if needed.

Width 4-1/2" | Height 96" | Depth -

Crown molding with rope detail that comes in an 8 foot strip, with rope detail fastened to the molding. Commonly used to finish the top of wall cabinets.

Width 7" | Height 17" | Depth 7"

Decorative corbel.

Width 36" | Height 96" | Depth .25"

Finished back panel. Commonly used to finish the back of an island. Grain will run vertically (along the height) and the panel will be finished on one side.

Width 33" | Height 96" | Depth 24"

Oven cabinet with 2 doors on top of the oven opening and 3 drawers on bottom, there is no center stile. The oven opening measurements are as follows: 24"H x 24"W.

The oven dimensions are as follows:

• Door height: 29-5/16€
• Door width: 16-1/4€
• Top drawer height: 6-11/16€
• 2nd & 3rd drawer height: 11-1/16€
• Drawer width: 32-1/2€
• The oven opening: 24"H x 24"W (the opening can be widened to a max width of 29-1/2" if needed)

Width 33" | Height 96" | Depth 24"

Oven cabinet with 2 doors on top of the oven opening and 1 drawer on bottom. The oven opening measurements are as follows: 42"H x 24"W. The doors will match the height of the doors on a 33x24 wall cabinet and the drawer front will measure 11-1/4"H x 33" W. The cutout can be widened on site to a maximum width of 30", and height of 53", if needed.

Width 3" | Height 96" | Depth 2.25"

Decorative half leg. The top flat section is 2" and the bottom flat section is 3". It is trimmable if needed.

Width 24" | Height 96" | Depth 0.75"

Refrigerator panel that has a 3" return. This panel will be finished on one side and the front edge.

Width 24" | Height 96" | Depth 0.75"

Refrigerator panel that has a finished edge and no return. This panel will be finished on both sides and the front edge.

Width 30" | Height 96" | Depth 0.75"

Refrigerator panel that has a 3" return. This panel will be finished on both sides and if the return is removed, the front edge is also finished.

Width 3" | Height 96" | Depth 0.75"

Wall filler. Commonly used to fill gaps between cabinets and gaps between cabinets and appliances.