Township White

Township White 8' Curved Crown Molding

SKU# CVM8-STHSNW

Width 96" | Height 2-1/2" | Depth 2"

Curved crown molding that will have a height of 2-1/2" once installed and will stick out 2" from the cabinet.

$188.66

Township White 24" Floating Shelf

SKU# FS24-STHSNW

Width 24" | Height 2-1/2" | Depth 10"

Floating shelf that should be mounted to a minimum of 2 studs for shelves under 50" wide and 3 studs for shelves more than 50" wide. Installation hardware and brackets will be included.

$445.38

Township White 30" Floating Shelf

SKU# FS30-STHSNW

Width 30" | Height 2-1/2" | Depth 10"

Floating shelf that should be mounted to a minimum of 2 studs for shelves under 50" wide and 3 studs for shelves more than 50" wide. Installation hardware and brackets will be included.

$513.42

Township White 36" Floating Shelf

SKU# FS36-STHSNW

Width 36" | Height 2-1/2" | Depth 10"

Floating shelf that should be mounted to a minimum of 2 studs for shelves under 50" wide and 3 studs for shelves more than 50" wide. Installation hardware and brackets will be included.

$581.47

Township White 60" Floating Shelf

SKU# FS60-STHSNW

Width 60" | Height 2-1/2" | Depth 10"

Floating shelf that should be mounted to a minimum of 2 studs for shelves under 50" wide and 3 studs for shelves more than 50" wide. Installation hardware and brackets will be included.

$649.51

Township White 8' Light Rail Molding

SKU# LM8-STHSNW

Width 96" | Height 2" | Depth 2-1/2"

Light rail molding.

$132.99

Shipping Time:	Ships in 5-15 Business Days
Style:	Slim Shaker
Face Frame:	3/4" solid wood
Door Frame:	7/8" solid wood
Door Center:	HDF (HDF is used to avoid cracking/warping)
Sides:	1/2" veneered plywood with UV finish
Top & Bottom (Wall):	1/2" veneered plywood with UV finish
Bottom (Base):	1/2" veneered plywood with UV finish
Back Panel:	1/2" veneered plywood with UV finish
Shelves:	3/4" veneered plywood, adjustable with UV finish, stainless steel shelf clips
Base Cabinet Shelf Depth:	Full depth
Drawer Box:	3/4" solid wood, dovetailed drawer box with 5-piece solid wood drawer front frame and MDF center panel
Drawer Glides:	Undermount, full extension, soft close glides, rated up to 50lbs (including the roll outs)
Base Corner Supports:	Wood corner supports and 1/4" plywood I-beams
Overlay:	Full
Hinges:	Concealed 6-way adjustable soft closing hinges
Cabinet Interior:	Natural finish
Center Stile:	None
Assembly Method:	Nail/screw/glue
Finish:	Hand sprayed, oven baked with a catalyzed conversion varnish top coat to promote durability and allow for easy cleaning
Toe Kick:	1/2" plywood toe kick (toe kick area will be a natural finish, 8' toe kicks are required for base, oven, pantry and vanity cabinets)
Installation Rail:	No installation rail due to full 1/2" back
Wall Cabinet Bottoms Finished (Exterior):	Natural, bottom edges of side panels are unfinished
CARB Compliant:	Yes
Door Hinges:	Wall cabinet doors can be flipped for L or R hinge orientation, base cabinets have pilot holes on L and R
Toe Kicks Included w/Base Cabinets:	No, 8' toe kicks are required for base, oven, pantry and vanity cabinets
Sides Panels Finished:	Yes
Installation/Designer Note:	Since the door is 7/8, if a cabinet has a door and is getting installed directly against a wall, deeper cabinet/appliance, or refrigerator panel, it will need to use a clearance strip. Clearance strips will be included with all kitchen orders at no charge, in addition to a diagram and instructions. The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth. Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above.

Township Rift Oak

Township Rift Black Oak

Get Help

Thank you!