Royal Oak

Royal Oak 96" Toe Kick
SKU# TK8-RGO

Width 96" | Height 4.5" | Depth .50"

Toe kick that comes in an 8 foot strip.

$35.51

Qty
Royal Oak 96" Crown Molding
SKU# CM8-RGO

Width 96" | Height | Depth

Crown molding. Installed height will be 2-9/16" and installed depth will be 2-11/16" (how far out it will extend from the cabinet).

$94.12

Qty
Royal Oak 19x26 Storage Mirror
SKU# SM1926-RGO

Width 19" | Height 26" | Depth 3-3/4"

Storage mirror cabinet that can be flipped so the mirror can open from either side.

$170.46

Qty

Shipping Time:	Ships in 3-10 business days
Style:	Raised
Face Frame:	3/4" x 1-1/2" plywood with Oak veneer
Door Frame:	3/4" plywood with Oak veneer
Door Center:	3/4" plywood with Oak veneer
Sides:	1/2" Plywood
Top & Bottom (Wall):	1/2" Plywood
Bottom (Base):	3/8"Plywood
Back Panel:	3 + 9 mm thick plywood sink base and vanity sink base cabinets will not have full backs, vanity sink bases with drawers will only have a full back behind the drawer section(s)
Shelves:	5/8" Plywood shelves, edge banded
Base Cabinet Shelf Depth:	10-1/2"
Drawer Box:	1/2" plywood front, back and sides, 3/8" drawer bottoms, screwed construction (plywood with oak veneer slab drawer front)
Drawer Glides:	Side mounted, epoxy coated, 3/4" extension
Base Corner Supports:	High impact, injection molded plastic
Overlay:	1/2 (partial)
Hinges:	Concealed hinges, 110 degree opening
Cabinet Interior:	Natural
Center Stiles:	Yes
Assembly Method:	Cam lock
Finish:	Polyurethane, UV resistant top coat with an oil based stain
Toe Kick:	1/2" Plywood
Installation Rail:	3/4" x 1-1/4" hardwood
Wall Cabinet Bottoms Finished (Exterior):	Yes
CARB Compliant:	Yes
Door Hinges:	Hinged right by default, base cabinet doors can be switched, but new holes may have to be drilled. Wall cabinet doors can be flipped.
Toe Kicks Included w/Base Cabinets:	Yes
Sides Panels Finished:	Yes
Installation/Designer Note:	The full-overlay door style leaves roughly a 1/4" clearance on the edge. If installed directly against a wall or deeper cabinet and a cabinet door opening of at least 90 degrees is desired, scribe molding should be installed between the cabinet and the wall (or deeper cabinet). If not, the door may not be able to open a full 90 degrees. For a full opening, a space of at least 1/4-1/2" is necessary, a larger space may be needed depending on the decorative hardware used on the cabinets. The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth. Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above.

Royal Oak

Get Help

Thank you!