Cobblestone Grey

Width 30" | Height 23.5" | Depth 8"

Range hood front that must be installed between 2 cabinets for support. Before installation of the range hood front, the blower should be installed and the depth adjusted using fillers and/or panels to fit the blower. The sides will be pre-finished to match.

Width 36" | Height 23.5" | Depth 8"

Range hood front that must be installed between 2 cabinets for support. Before installation of the range hood front, the blower should be installed and the depth adjusted using fillers and/or panels to fit the blower. The sides will be pre-finished to match.

Width 24" | Height 36" | Depth 8"

Toilet topper cabinet with 2 doors and 1 tilt-out drawer on bottom. There will be a finished opening between the doors and tilt-out drawer that is 20-7/8"W x 5-3/4"H.

Width 18" | Height 18" | Depth 15"

3-drawer wall cabinet, there will be 1 standard height drawer on top and 2 deeper drawers on bottom. This cabinet is meant to sit right on the countertop when being installed. This cabinet will not have soft closing glides.

Width 24" | Height 18" | Depth 15"

3-drawer wall cabinet, there will be 1 standard height drawer on top and 2 deeper drawers on bottom. This cabinet is meant to sit right on the countertop when being installed. This cabinet will not have soft closing glides.

Width 15" | Height 42" | Depth 3"

Wall end panel that has a 1/2" thick panel with a 3" wide filler on front. It can be used on either the left or right. This panel can also be trimmed to desired height and is commonly used next to a wall appliance like a microwave.