Cobblestone Grey

Width 96" | Height 1-21/32" | Depth .25

Batten molding that comes in 8 ft long sections and is 0.25" thick.

Width 23.25" | Height 34.5" | Depth .25"

Base skin that is 1/4" thick and can be cut to size if necessary. *Please note actual width is 23-1/4"*

Width 30" | Height 23.5" | Depth 8"

Range hood front that must be installed between 2 cabinets for support. Before installation of the range hood front, the blower should be installed and the depth adjusted using fillers and/or panels to fit the blower. The sides will be pre-finished to match.

Width 36" | Height 23.5" | Depth 8"

Range hood front that must be installed between 2 cabinets for support. Before installation of the range hood front, the blower should be installed and the depth adjusted using fillers and/or panels to fit the blower. The sides will be pre-finished to match.

Width 96" | Height 9/16" | Depth .25"

Rope insert for crown molding (LCM8) that comes in 8 ft long sections. There is a flat section on the crown to accommodate the rope insert installation. If it seems the rope insert will not attach properly, make sure the crown is not upside down.

Width 96" | Height .75" | Depth .25"

Shoe molding that can be trimmed to desired height and/or width.

Width 96" | Height 0.75" | Depth 0.25"

Scribe molding that comes in 8 ft long sections. It can be used behind light rail molding when wrapping around the side of a wall cabinet.

Width 36" | Height 96" | Depth .25"

1/4" thick stained panel. Grain runs up and down if the panel is stood up tall (making it 96" high and 36" wide). This panel comes finished on one side.

Width 96" | Height 4.5" | Depth .25"

Toe kick that comes in 8' long sections and can be cut to size if necessary.

Width 23.25" | Height 96" | Depth .25"

Tall skin that is 1/4" thick and can be cut to size if necessary. *Please note actual width is 23-1/4"*

Width 24" | Height 36" | Depth 8"

Toilet topper cabinet with 2 doors and 1 tilt-out drawer on bottom. There will be a finished opening between the doors and tilt-out drawer that is 20-7/8"W x 5-3/4"H.

Width 15" | Height 42" | Depth .25"

Wall Skin that is 1/4" thick and can be cut to size if necessary.