Vail White Shaker Pre-Assembled Kitchen Cabinet

Alpine White Shaker 33" Roll Out Tray with a Dovetailed Drawer Box

Vail White Shaker 33" Roll Out Tray with a Dovetailed Drawer Box

SKU# 33RT-DR-VW-Assembled

Width 29" | Height 2.875" | Depth 21"

Roll out tray to be used with a 33" wide base cabinet. The roll out tray will come pre-assembled, dovetailed, and have a soft close full extension track. They are solid birch with a natural maple finish. *Please note this roll out tray will only work with this collection*

$349.16

Alpine White Shaker 48x96 Finished Back Panel

Vail White Shaker 48x96 Finished Back Panel

SKU# FBP489614-1-VW-Assembled

Width 96" | Height 48" | Depth 0.25"

Finished back panel. Commonly used to finish the back of an island.

$401.46

Vail White Shaker 96" Crown Molding

SKU# CM96-VW-Assembled

Width 96" Height 2.5" Depth .78125"

Crown molding that comes in an 8 foot strip. Commonly used to finish the top of wall cabinets. Once installed, the crown will stick out about 1-5/8" from the cabinet and the height off the cabinet will be about 1-7/8".

$153.24

Vail White Shaker Cove Crown Molding

SKU# CM96K-4-VW-Assembled

Width 96" | Height 4" | Depth .75"

Crown molding with large cove detail. Installed height will be 3" and installed depth will be 2-3/4" (how far it will extend from the cabinet).

$289.92

Vail White Shaker Crown Molding

SKU# CM96H-4-VW-Assembled

Width 96" | Height 4" | Depth .75"

Crown molding. Installed height will be 3 1/8" and installed depth will be 2 5/8" (how far out it will extend from the cabinet).

$246.45

Shipping Time:	Shipped in 5-15 business days
Style:	Shaker
Face Frame:	3/4" x 1-1/2" Solid Birch
Door Frame:	3/4" Solid Birch
Door Center:	MDF/HDF (to avoid cracking/warping, reversed raised door panel)
Door Frame Width:	2.375"
Center Panel Beveled Edge:	No
Sides:	1/2" A-Grade plywood with wood veneer
Top & Bottom (Wall):	1/2" A-Grade plywood with wood veneer
Bottom (Base):	3/8" A-Grade plywood with wood veneer
Back Panel:	1/2" Full back
Shelves:	3/4 " A-Grade plywood with wood veneer
Base Cabinet Shelf Depth:	1/2
Drawer Box:	Solid Wood 17mm (close to 3/4") sides, Drawer bottom 3/8" plywood, Drawer length 21". Dovetail construction, Natural finish.
Drawer Glides:	Undermount, full extension with soft closing feature
Base Corner Supports:	Metal corner brackets
Overlay:	Full with butt doors
Hinges:	Concealed 6-way adjustable with Soft Closing Feature
Cabinet Interior:	Natural Finish
Center Stile:	No center stile on cabinetry 24"W to 36"W
Assembly Method:	L-bracket
Finish:	Polyurethane finish
Toe Kick:	1/2" Plywood (sides of the toe kicks will be unfinished)
Installation Rail:	None (there is a full back)
Wall Cabinet Bottoms Finished (Exterior):	Yes
KCMA Compliant:	Yes
CARB Compliant:	Yes
Door Hinges:	Hinged To The Right By Default. For Wall Cabinets The Face Frame Can Be Flipped. For Base Cabinets Unhinge The Door, Flip It, Screw Holes On The Opposite Side To Re-Hinge, And Then Fill The Original Holes (Touch Up Kit Can Be Purchased For This)
Toe Kicks Included w/Base Cabinets:	Yes
Sides Panels Finished:	Yes
Installation/Designer Note:	The full-overlay door style leaves roughly a 1/4" clearance on the edge. If installed directly against a wall or deeper cabinet and a cabinet door opening of at least 90 degrees is desired, scribe molding should be installed between the cabinet and the wall (or deeper cabinet). If not, the door may not be able to open a full 90 degrees. For a full opening, a space of at least 1/4-1/2" is necessary, a larger space may be needed depending on the decorative hardware used on the cabinets. The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth. Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above.

Vail White Shaker

Get Help

Thank you!