Union White

Tuscan Stone 36" Diagonal Corner Sink Front Floor

SKU# MEX-8-NF-Assembled

Width 96" | Height 6" | Depth .75"

Molding extension that is used with starter molding (SKU: STRM-8) to make it easier to install molding on the tops of cabinets. The molding extension can be used without the starter molding, but it would first need a cleat support installed on site.

$478.68

Union White Shiplap Molding

SKU# SHL-8-NF-Assembled

Width 96" | Height 6" | Depth .75"

Shiplap interlocking molding commonly used for walls, backsplash, or the backs of islands and peninsulas.

$273.72

Union White Stacking Molding

SKU# STKM-8-NF-Assembled

Width 96" | Height .75" | Depth 2.5"

Stacking molding to be used as a decorative piece between cabinets that are getting stacked one above the other. This hides the 'cabinet seam' that you would normally see without a decorative molding in between or applied over the seam.

$217.85

Union White Starter Molding

SKU# STRM-8-NF-Assembled

Width 96" | Height .75" | Depth 1.5"

Starter molding that is installed above wall and tall cabinets which acts as a cleat for a molding extension (SKU: MEX-8), to make it easier to mount moldings on top of the cabinets. The starter molding and molding extension are ideal to use when mounting crown molding all the way to the ceiling.

$217.85

Union White 30" Organizer Cabinet

SKU# WO306-NF-Assembled-0

Width 30" | Height 6" | Depth 12"

Organizer cabinet with wood veneer edge banding and a finished interior. There will be 2 horizontal shelving areas on the left which measure approximately 11-1/8"W x 2"H, and 3 vertical storage areas on the right which measure approximately 5-1/4"W x 4-3/4"H.

$452.89

Union White 36" Organizer Cabinet

SKU# WO366-NF-Assembled-0

Width 30" | Height 6" | Depth 12"

Organizer cabinet with wood veneer edge banding and a finished interior. There will be 2 horizontal shelving areas on either end which measure approximately 11-1/8"W x 2"H, and 2 vertical storage areas in the middle which measure approximately 5-1/4"W x 4-3/4"H.

$514.48

Midtown Blue Shaker 12x30 Wall Cabinet (No Door) To Be Used With A Glass Door

Union White Inside Corner Molding

SKU# ICM8-NF-Assembled

Width 96" | Height .75" | Depth .75"

Inside corner molding.

$97.85

Union White Light Rail Molding

SKU# LRM-NF-Assembled

Width 96" | Height .75" | Depth 1.5"

Light rail molding, overall depth is 1-1/2", the flat part that will install under the wall cabinets is 3/4" deep. The lip that will extend over the front of the wall cabinet is 1/4" high.

$239.93

Union White Quarter Round Molding

SKU# QRM-NF-Assembled

Width 96" | Height .75" | Depth .75"

Quarter round molding.

$102.59

Union White Outside Corner Molding

SKU# OCM8-NF-Assembled

Width 96" | Height .75" | Depth .75"

Outside corner molding. Inside height and depth is 5/8".

$102.59

Shipping Time:	Ships in 2-4 weeks
Style:	Recessed
Face Frame:	3/4" x 1-1/2" solid wood
Door Frame:	3/4" Thick x 3-1/4" W solid birch
Door Center:	3/8" thick MDF captured in frame w/rubber spacers
Sides:	1/2" birch veneered plywood sides, dovetailed into face frame
Top & Bottom (Wall):	1/2" thick birch veneered plywood
Bottom (Base):	1/2" thick birch veneered plywood
Back Panel:	1/2" thick birch veneered plywood
Shelves:	3/4" birch veneered plywood with matching edge banding, nickel plated shelf clips
Base Cabinet Shelf Depth:	18"
Drawer Front:	5-pc recessed panel
Drawer Box:	5/8" solid birch, dovetailed drawer box with 3/8" plywood bottom
Drawer Glides:	BLUM Zinc, undermount, full extension, soft close, 50 lbs capacity
Base Corner Supports:	1-1/2" x 1/2" panel beam
Overlay:	Full
Hinges:	BLUM 6-way adjustable, concealed, soft-close, opens 110
Cabinet Interior:	Natural finish
Center Stile:	None unless noted in cabinet description
Assembly Method:	Ships pre-assembled, dovetailed, glued, stapled, screwed
Finish:	Sherwin Williams Paint with a catalytic conversion top coat
Toe Kick:	3/4" x 4-1/2" solid birch (toe kick area will be a natural finish, 8' toe kicks are required for base, oven, pantry and vanity cabinets)
Installation Rail:	1/2" full back so a specific rail isn't needed
KCMA Compliant:	Yes
CARB Compliant:	Yes
Door Hinges:	Please use drop down options for each cabinet to change hinging from right to left. Doors can also be flipped to change hinging after deliver, if needed.
Side Panels Finished:	No (side will be unfinished plywood, for exposed sides, be sure to add the finished side option, when selected, the matching side will also be flush with the side of the cabinet).
Installation/Design Note:	The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth. Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above.

Union White

Get Help

Thank you!