Tuscan Cloud

Width 96" | Height .75" | Depth 2.5"

Stacking molding to be used as a decorative piece between cabinets that are getting stacked one above the other. This hides the 'cabinet seam' that you would normally see without a decorative molding in between or applied over the seam.

Width 96" | Height .75" | Depth 1.5"

Starter molding that is installed above wall and tall cabinets which acts as a cleat for a molding extension (SKU: MEX-8), to make it easier to mount moldings on top of the cabinets. The starter molding and molding extension are ideal to use when mounting crown molding all the way to the ceiling.

Width 30" | Height 36" | Depth 12"

Wall blind cabinet with 2 adjustable shelves and a 7" stile. It can be installed right against the corner or pulled a maximum of 3" from the corner which would take up a total of 33" of wall space. Door width is 14-3/4" and the blind opening is 7-3/4" wide. A filler must be used between the blind and the adjacent cabinet so the doors are able to open without interference. The filler must be purchased separately.

Width 30" | Height 36" | Depth 12"

2 door wall cabinet that has 3 adjustable shelves.

Width 30" | Height 36" | Depth 12"

Wall cabinet with no doors that is designed to be used with glass doors (sold separately). Cabinet will have a finished interior, 3 adjustable 1/4" thick glass shelves, and pre-installed hinges.

Width 30" | Height 36" | Depth 12"

Wall open shelf cabinet with a finished interior. There will be a valance on top and 3 adjustable shelves with an Ogee edge.

Width 30" | Height 36" | Depth 21"

Microwave wall cabinet that has two 14-1/2" high doors on top. The microwave opening is 24"W x 13-1/2"H which can be widened to a maximum of 28"W x 19-3/4"H. The cabinet will be pre-finished on both sides to match. **Note this cabinet has a 21" depth**

Width 96" | Height .75" | Depth .75"

Inside corner molding.

Width 96" | Height .75" | Depth 1.5"

Light rail molding, overall depth is 1-1/2", the flat part that will install under the wall cabinets is 3/4" deep. The lip that will extend over the front of the wall cabinet is 1/4" high.

Width 96" | Height .75" | Depth .75"

Quarter round molding.

Width 96" | Height .75" | Depth .75"

Outside corner molding. Inside height and depth is 5/8".