Tuscan Cloud

Width 96" | Height .75" | Depth 2.5"

Stacking molding to be used as a decorative piece between cabinets that are getting stacked one above the other. This hides the 'cabinet seam' that you would normally see without a decorative molding in between or applied over the seam.

Width 96" | Height .75" | Depth 1.5"

Starter molding that is installed above wall and tall cabinets which acts as a cleat for a molding extension (SKU: MEX-8), to make it easier to mount moldings on top of the cabinets. The starter molding and molding extension are ideal to use when mounting crown molding all the way to the ceiling.

Width 96" | Height .75" | Depth .75"

Inside corner molding.

Width 96" | Height .75" | Depth 1.5"

Light rail molding, overall depth is 1-1/2", the flat part that will install under the wall cabinets is 3/4" deep. The lip that will extend over the front of the wall cabinet is 1/4" high.

Width 96" | Height .75" | Depth .75"

Quarter round molding.

Width 96" | Height .75" | Depth .75"

Outside corner molding. Inside height and depth is 5/8".

Width 24" | Height 16-3/8" | Depth 24"

Drawer bench seat cabinet with an overall height of 16-3/8" and a drawer front height of 11-11/4". The cabinet will have the same constrution as other drawer base cabinets with an open top, and the interior drawer depth will be 19-5/8".

Width 30" | Height 16-3/8" | Depth 24"

Drawer bench seat cabinet with an overall height of 16-3/8" and a drawer front height of 11-11/4". The cabinet will have the same constrution as other drawer base cabinets with an open top, and the interior drawer depth will be 19-5/8".

Width 36" | Height 16-3/8" | Depth 24"

Drawer bench seat cabinet with an overall height of 16-3/8" and a drawer front height of 11-11/4". The cabinet will have the same constrution as other drawer base cabinets with an open top, and the interior drawer depth will be 19-5/8".