Tuscan Cloud

Width 96" | Height .75" | Depth 2.5"

Stacking molding to be used as a decorative piece between cabinets that are getting stacked one above the other. This hides the 'cabinet seam' that you would normally see without a decorative molding in between or applied over the seam.

Width 96" | Height .75" | Depth 1.5"

Starter molding that is installed above wall and tall cabinets which acts as a cleat for a molding extension (SKU: MEX-8), to make it easier to mount moldings on top of the cabinets. The starter molding and molding extension are ideal to use when mounting crown molding all the way to the ceiling.

Width 3" | Height 36" | Depth 2.25"

Wall plain pilaster. The filler the pilaster is mounted on is 3/4" deep, the pilaster itself is 1-1/2" deep. Top and bottom sections above and below the pilaster are each 2" tall. 2" will need to be trimmed from the top or bottom before installation. **Pilasters are handmade and may therefore feature inconsistencies in shape or form. These are in no way considered defects**

Width 3" | Height 36" | Depth .75"

Wall filler. Both long sides of the filler are finished.

Width 3" | Height 36" | Depth 24"

Spice pull out to be used with a wall filler (sold separately). It comes with chrome rails and full extension, ball bearing glides (not soft-close). It will have 4 adjustable shelves and is constructed of UV coated maple wood. The pullout must be installed between 2 cabinets and the 3" wall filler must be ordered separately.

Width 3" | Height 36" | Depth 3"

Corner post. Height on top of the post will be 4", the bottom height is 6-1/4", 2" must be trimmed from the top or bottom of the post. **Posts are handmade and may therefore feature inconsistencies in shape or form. These are in no way considered defects**

Width 96" | Height .75" | Depth .75"

Inside corner molding.

Width 96" | Height .75" | Depth 1.5"

Light rail molding, overall depth is 1-1/2", the flat part that will install under the wall cabinets is 3/4" deep. The lip that will extend over the front of the wall cabinet is 1/4" high.

Width 96" | Height .75" | Depth .75"

Quarter round molding.

Width 96" | Height .75" | Depth .75"

Outside corner molding. Inside height and depth is 5/8".

Width 3" | Height 36" | Depth 12"

Wall column that can be trimmed on site if needed.

Width 3" | Height 36" | Depth 15"

Wall column that can be trimmed on site if needed.