Providence White

Width 96" | Height 4" | Depth .75"

Crown molding. Installed height will be 3 1/8" and installed depth will be 2 5/8" (how far out it will extend from the cabinet).

Width 39" | Height 34.5" | Depth 24"

1 door blind base corner cabinet. The actual width is 39" however it will take up a minimum of 42" of wall space and can be pulled up to 45". This cabinet has 1 drawer and is reversible. The door/drawer width is 14-9/16”, blind opening is 11 7/8”. The drawer and door opening will be 3" less than the width of the door and drawer front. A filler will be needed between the blind and adjacent cabinet to ensure the drawer and door open properly; the filler must be purchased separately.

Width 96" Height 2.5" Depth .78125"

Crown molding that comes in an 8 foot strip. Commonly used to finish the top of wall cabinets. Once installed, the crown will stick out about 1-5/8" from the cabinet and the height off the cabinet will be about 1-7/8".

Width 0.75" | Height 0.75" | Depth 96"

Inside corner molding that comes in an 8 foot strip.

Width .75" | Height .25" | Depth 96"

Scribe molding that comes in an 8 foot strip. Width is 3/4" and it is 1/4" thick. Commonly used to fill small gaps between cabinets and walls. Curved edge will be smooth (there will be no actual ridges in the wood like shown in the schematic).

Width 96" | Height 4" | Depth .75"

Crown molding with large cove detail. Installed height will be 3" and installed depth will be 2-3/4" (how far it will extend from the cabinet).