Pewter Grey Shaker

Width 48" | Height 34.5" | Depth 21"

Bathroom vanity that has 4 doors, 1 drawer on far left, 1 drawer on far right, and a fake drawer front in the middle. There will be no shelves with this cabinet.

Width 48" | Height 6" | Depth

Valance that can be trimmed up to 6" on either side.

Width 48" | Height 36" | Depth .25"

Finished back panel. Commonly used to finish the back of an island. Grain will run vertically (along the height) and the panel will be finished on one side.

Width 96" | Height 48" | Depth 0.25"

Finished back panel. Commonly used to finish the back of an island.

Width 96" Height 2.5" Depth .78125"

Crown molding that comes in an 8 foot strip. Commonly used to finish the top of wall cabinets. Once installed, the crown will stick out about 1-5/8" from the cabinet and the height off the cabinet will be about 1-7/8".

Width 48" | Height 34.5" | Depth 0.25"

Beaded board panel. Commonly used to give a beaded finished look.

Width 96" | Height 4" | Depth .75"

Crown molding with large cove detail. Installed height will be 3" and installed depth will be 2-3/4" (how far it will extend from the cabinet).

Width 96" | Height 4" | Depth .75"

Crown molding. Installed height will be 3 1/8" and installed depth will be 2 5/8" (how far out it will extend from the cabinet).