Milan White Gloss

Width 48" | Height 2-1/2" | Depth 10"

Floating plywood shelf with a walnut finish that will include the mounting brackets and hardware. The weight limit is 15 lbs/linear foot as long as the proper installation instructions are followed (instructions will be included with the shelf).

Width 48" | Height 12" | Depth 24"

Lift-up door wall cabinet that will not have any shelves.

Width 96" | Height 4-1/2" | Depth 3/4"

Base board molding that is edge banded on all 4 edges.

Width 96" | Height 1-1/2" | Depth 3/4"

Light rail molding that must be used with the starter molding (STRM-8) to be flush with the front of the cabinet doors.

Width 96" | Height 3/4" | Depth 1-1/2"

Starter molding that is installed above wall and tall cabinets which acts as a cleat for light rail molding (SKU: LRM), to make it easier to mount moldings on top of the cabinets. The starter molding and molding extension are ideal to use when mounting crown molding all the way to the ceiling. It can also be used with the straigh valance (SKU: VST-6) for a Soffit build up.

Width 96" | Height 4-1/2" | Depth 3/4"

Toe kick.

Width 48" | Height 23-7/8" | Depth 24"

2 door range top base cabinet that comes with (1) adjustable shelf and a full top panel that will need to be cut on site to accommodate the range. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height. *A heat shield will need to be used on both sides of an oven base cabinet or range-top base cabinet to shield the adjacent cabinet boxes from the oven heat. This can be added from the 'View Options' area for this cabinet. Each heat shield will be 30" high and can be cut to size, as needed (sold in quantities of 1, a quantity of 2 must be ordered to receive 2 heat shields).*

Width 48" | Height 23-7/8" | Depth 24"

2 drawer range top base cabinet that comes with (2) 11-7/8" high drawers (drawer front height) and a full top panel that will need to be cut on site to accommodate the range. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height. *A heat shield will need to be used on both sides of an oven base cabinet or range-top base cabinet to shield the adjacent cabinet boxes from the oven heat. This can be added from the 'View Options' area for this cabinet. Each heat shield will be 30" high and can be cut to size, as needed (sold in quantities of 1, a quantity of 2 must be ordered to receive 2 heat shields).*

Width 48" | Height 96" | Depth 3/4"

Back panel that has one finished side. All edges and opposite side will be unfinished. There will be no edge banding but edge banding can be ordered and applied on site, if needed.

Width 96" | Height 6" | Depth 3/4"

Straight valance that can be used with the starter molding (SKU: STRM-8) for a Soffit build-up.