Milan Hazel

Width 96" | Height 4-1/2" | Depth 3/4"

Base board molding that is edge banded on all 4 edges.

Width 96" | Height 1-1/2" | Depth 3/4"

Light rail molding that must be used with the starter molding (STRM-8) to be flush with the front of the cabinet doors.

Width 96" | Height 3/4" | Depth 1-1/2"

Starter molding that is installed above wall and tall cabinets which acts as a cleat for light rail molding (SKU: LRM), to make it easier to mount moldings on top of the cabinets. The starter molding and molding extension are ideal to use when mounting crown molding all the way to the ceiling. It can also be used with the straigh valance (SKU: VST-6) for a Soffit build up.

Width 96" | Height 4-1/2" | Depth 3/4"

Toe kick.

Width 96" | Height 6" | Depth 3/4"

Straight valance that can be used with the starter molding (SKU: STRM-8) for a Soffit build-up.

Width 15-7/8" | Height 48" | Depth 3/4"

Wainscot wall panel, to be used on the exposed side of a 48" high wall cabinet with drawers, with a depth of 15". Wainscot panels will always be shipped loose and will need to be installed on site. The panel is deep enough to cover the side of the door, giving the door a built in look.

Width 15-7/8" | Height 54" | Depth 3/4"

Wainscot wall panel, to be used on the exposed side of a 54" high wall cabinet with drawers, with a depth of 15". Wainscot panels will always be shipped loose and will need to be installed on site. The panel is deep enough to cover the side of the door, giving the door a built in look.

Width 15-7/8" | Height 60" | Depth 3/4"

Wainscot wall panel, to be used on the exposed side of a 60" high wall cabinet with drawers, with a depth of 15". Wainscot panels will always be shipped loose and will need to be installed on site. The panel is deep enough to cover the side of the door, giving the door a built in look.