Milan Hazel

Width 3/4" | Height 34-1/2" | Depth 24-7/8"

Base end panel that is finished on two sides and edge-banded on all four edges.

Width 3" | Height 34-1/2" | Depth 24-7/8"

Base column that can be trimmed on site if needed. The sides will be flush and finished, and the back will be unfinished.

Width 3" | Height 34-1/2" | Depth 24-7/8"

Appliance end panel with a 3" return which consists of a filler interlocked with a 1/2" plywood return panel. The exposed sides will have near-flush finished ends. The front can be trimmed down to 1" wide if necessary (edge banding may be needed in order to finish the cut edge). The sides will be flush and finished and all four edges are edge-banded.

Width 6" | Height 34-1/2" | Depth 24-7/8"

Appliance end panel with a 3" return which consists of a filler interlocked with a 1/2" plywood return panel. The exposed sides will have near-flush finished ends. The front can be trimmed down to 1" wide if necessary (edge banding may be needed in order to finish the cut edge). The sides will be flush and finished and all four edges are edge-banded.

Width 21-7/8" | Height 34-1/2" | Depth 3/4"

Vanity base end panel that is finished on two sides and edge-banded on all four edges.

Width 18" | Height 54" | Depth 15"

Wall cabinet with (1) 6-3/4" drawer on bottom (drawer front height) and (1) 47" high door on top. There will be 3 adjustable shelves on the top of the cabinet. The exposed sides have near-flush ends and are unfinished, wainscot panels can be ordered to finish exposed sides. **Note this cabinet has a 15" depth**

Width 24" | Height 54" | Depth 15"

Wall cabinet with (1) 6-3/4" drawer on bottom (drawer front height) and (2) 47" high doors on top. There will be 3 adjustable shelves on the top of the cabinet. The exposed sides have near-flush ends and are unfinished, wainscot panels can be ordered to finish exposed sides. **Note this cabinet has a 15" depth**

Width 15-7/8" | Height 54" | Depth 3/4"

Wainscot wall panel, to be used on the exposed side of a 54" high wall cabinet with drawers, with a depth of 15". Wainscot panels will always be shipped loose and will need to be installed on site. The panel is deep enough to cover the side of the door, giving the door a built in look.